P000D: Position d'arbre à cames B — réponse lente, banc 2
Que faire
Ask how many of these camshaft faults are stored. If all four are, the answer is almost certainly the oil rather than four failed parts — no engine wears four phasers at once, and an oil change with the correct grade often resolves it.
Say when the oil was last changed and what grade went in. It is the most useful single fact for this whole family.
Ask for the oil control solenoid screens to be cleaned before any part is ordered. They are fine mesh filters that clog with sludge and are usually free to clean.
Say whether the fault is worse from cold, which points at oil rather than hardware.
Ce que signifie ce code
The exhaust camshaft phaser on bank 2 is moving to its commanded position too slowly.
This completes the set of four, and the pattern across them is worth reading before any one of them is acted on. With two banks and two camshafts each, the distribution of codes says where the fault is more precisely than any single code does.
One phaser affected — that solenoid, its screen, or that phaser.
Both camshafts on one bank — something that bank shares: its oil feed gallery, or a supply passage restricted by sludge upstream of both solenoids.
The same camshaft on both banks — worth noticing, because it points at neither oil nor a single part. Both exhaust phasers slowing together usually means heat and deposits, since both sit on the hot side and age identically.
All four — the oil, unambiguously. No engine wears four phasers at once, so a full set of these codes is a service question rather than a repair one.
That last case is the one worth stating plainly, because four codes look alarming and the answer is usually an oil change with the correct grade.
The diagnosis for a single code remains the family's, and the order matters because it runs cheapest first: solenoid screen, oil condition and grade, the solenoid itself, then the phaser. Phasers do wear, but they are the last conclusion rather than the first.
Causes probables
Commencez ici
Moins fréquent
- Niveau d'huile moteur bas · facile
- Déphaseur d'arbre à cames usé · spécialisée
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de P000D.