P00D2: Chauffage de la sonde lambda — circuit de commande, plage/performance, banc 1 capteur 2
Que faire
Ask whether other faults from the same oxygen sensor are stored. The heater is what brings the sensor up to working temperature, so a heater fault makes the sensor report nonsense too — and one repair usually clears both.
Ask for the connector to be inspected for heat damage. This circuit carries real current, so a failing connection burns rather than just corroding, and the discolouration is usually visible.
Have the battery and charging system checked if that has not been done recently, since a weak supply slows the heater enough to fail the test with nothing wrong.
The car will drive normally. This is an emissions monitoring fault, so plan the repair around your MOT rather than treating it as urgent.
Ce que signifie ce code
The heater circuit for the downstream oxygen sensor on bank 1 is behaving oddly without being open or shorted.
An oxygen sensor's heater is a precondition rather than a convenience, and knowing that explains why a heater fault sets sensor codes. A zirconia element produces no usable signal below roughly 300°C, so until the heater has done its work the sensor is simply not reporting.
Range/performance means the module is watching how the heater behaves and finding it wrong — usually by measuring the current it draws, from which the element's resistance and therefore its temperature can be inferred. The circuit conducts; it does not conduct correctly.
Which points at three things:
- Resistance in the circuit. A heater draws real current, so a corroded terminal both drops voltage and heats itself — which oxidises it further. Look for discoloured connector plastic, not just continuity.
- A degrading heater element, whose resistance has drifted with age so the module can no longer predict its temperature.
- Supply quality. A weak battery or poor earth slows warm-up enough to fail the test with a sound heater.
Expect sensor response or closed-loop codes stored alongside, and treat the heater as the cause. A sensor that never gets hot cannot report properly, so fixing the heater usually clears several codes at once.
On the downstream sensor the practical consequence is emissions monitoring rather than driveability — the car drives normally and cannot complete its self-checks.
Causes probables
Commencez ici
- Chauffage de sonde lambda défectueux · modérée
- Résistance élevée dans le câblage du capteur · modérée
- Connecteur corrodé ou mal enclenché · facile
Moins fréquent
- Tension du système basse · facile
- Fusible du circuit de chauffage grillé · facile
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de P00D2.