U0117: Perte de communication avec le calculateur de prise de force
Que faire
The equipment — tipper, crane, mixer, pump, winch — will most likely not run at all, and the vehicle will drive normally.
That is the safe outcome: when the computer controlling the power take-off goes quiet, the rest of the vehicle assumes it is not engaged and refuses to run the equipment.
One thing to check before driving off, though. If the PTO was engaged when the fault appeared, confirm the equipment is actually disengaged rather than trusting the dashboard, because the dashboard has lost the thing that was telling it.
Contact whoever built or converted the body before a general workshop. This wiring is almost always fitted by the converter rather than the vehicle manufacturer, and the fault is nearly always at the join between their wiring and the chassis wiring — a corroded splice, an earth on painted metal, a cable rubbing on something that moves.
If it works from cold and fails once warm, or fails on rough ground, say so. Both descriptions point straight at that join and save a great deal of searching.
Ce que signifie ce code
The power take-off control module has stopped being heard from. The general reasoning is at U0100, and U0465 explains what a PTO is and why its published state governs a set of safety interlocks.
Silence and bad data fail differently here, and the difference is worth stating because one of them is much better than the other.
A module reporting an implausible state leaves the interlocks acting on something untrue. A module that has gone silent normally makes every other system default to not engaged — which is the safe assumption, and usually means the equipment simply will not run.
So the common outcome is a vehicle that drives perfectly and a tipper, crane or pump that does nothing, which is inconvenient rather than dangerous. The uncommon outcome is the one to check for: if the PTO was engaged when communication was lost, the mechanism may still be engaged while the vehicle believes it is not. Confirm the equipment is actually disengaged before driving, rather than trusting a dashboard that has lost its source.
Where the fault is has the same answer as U0465, and it is worth acting on rather than reading past. PTO wiring is installed by the body builder rather than the vehicle manufacturer, so the fault is almost always at the join between the chassis harness and the body harness — a spliced connection that has corroded, an earth taken to painted metal, a cable routed against something that moves. A vehicle that works from cold and fails once warm, or fails on rough ground, is describing that join.
Contacting the converter before a franchised workshop is usually the shorter route, because they installed it and hold the drawings.
Causes probables
Commencez ici
- Épissure de câblage médiocre dans une installation non d'origine · modérée
- Connecteur corrodé ou mal enclenché · facile
- Connexion de masse corrodée · modérée
- Faisceau de câblage endommagé · modérée
Moins fréquent
- Fusible grillé ou alimentation hors service · facile
- Câblage du bus de données endommagé · modérée
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de U0117.