U04B1: Données non valides reçues du module de surveillance de la batterie
Que faire
Expect stop-start to stop working, and possibly a battery warning, before anything else. The car has lost confidence in what it knows about its own battery, so it takes the cautious option.
The single most useful question: has the battery been replaced, and was the new one registered to the car? Many modern cars need to be told, and it takes a couple of minutes with the right tool. Skipping it causes this fault and also shortens the new battery's life, because the car keeps charging it as though it were the old one.
Mention anything wired directly to the battery — a dashcam, extra lights, an alarm or a tracker. Connected to the wrong post, they draw current the car cannot measure, and its accounting drifts until it stops making sense.
Have the battery and its terminals tested anyway. It is cheap, and a tired battery produces odd reports all over the car.
Ce que signifie ce code
The battery monitor is reporting a state of charge or health that cannot be accepted. See U0400 for the family's framing.
Modern cars measure their own battery far more carefully than most owners realise, and this code is a good place to explain why. A small sensor clamped around the negative terminal measures every amp entering and leaving the battery, its voltage and its temperature, and from those it keeps a running estimate of state of charge and of how much capacity the battery has lost with age.
That estimate drives real behaviour. The alternator is not simply switched on — charging voltage is chosen from what the battery needs, and deliberately reduced under acceleration to save fuel. Stop-start is permitted or refused on the same estimate. So is how long the car keeps its electronics awake after being locked.
Which gives this code its single most useful cause: a battery replaced without telling the car. The monitor keeps the ageing history of a battery that is no longer in the vehicle, so it reports a tired battery which now measures like a new one, and the numbers stop being consistent. On many vehicles registering the new battery is a two-minute procedure with a scan tool — and skipping it also causes a new battery to be undercharged into an early grave, which is why it matters beyond this code.
The second cause is anything wired around the sensor. A dashcam, winch, extra lighting or an alarm connected directly to the battery's negative post bypasses the measurement entirely, so current flows that the module cannot see and its arithmetic drifts.
The battery itself is still worth testing. A cell that has failed internally produces readings nothing can reconcile — and the corpus's standing note about supply faults applies: a marginal battery generates implausible reports across half the vehicle.
Causes probables
Commencez ici
- Nouvelle batterie non enregistrée sur le véhicule · facile
- Tension du système basse · facile
- Connecteur corrodé ou mal enclenché · facile
Moins fréquent
- Connexion de masse corrodée · modérée
- Faisceau de câblage endommagé · modérée
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de U04B1.