P043E: Lage doorstroming door de referentieopening van de lekdetectie van het brandstofdampsysteem
Wat te doen
Fix this one before believing any other fuel vapour leak codes. It concerns the reference the system calibrates its leak test against — so while it is faulty, every leak measurement it makes is unreliable. It is worth saying that to the garage before anyone starts replacing fuel tank parts.
The cause is often simply dirt, a spider web or an insect nest in a small filtered vent under the car, which is inexpensive to clear.
The car will drive completely normally. This matters at MOT time, because the emissions self-checks will not complete, and an incomplete monitor can fail the test on its own.
Keep the fuel filler cap properly tightened, since it is part of the sealed system being tested.
Wat deze code betekent
The calibrated reference orifice used to check for fuel vapour leaks is not flowing correctly.
This is one of the more elegant pieces of engineering in emissions control, and understanding it explains the code entirely. The system has to detect a leak the size of a small pinhole in a fuel tank — and how big a leak looks depends on temperature, fuel level and altitude, none of which are constant.
So rather than measure against a fixed number, the system measures against a known hole. A precision orifice, typically half a millimetre, is built into the leak detection assembly. Before testing the tank, the module draws through that orifice and records what a leak of exactly that size looks like today — then compares the tank against it.
This code says the reference itself is unreliable. The orifice is partially blocked, so the calibration is wrong — and every leak test based on it is wrong too.
Which is why this code should be fixed before any leak code is believed. A blocked reference makes real leaks look small and small ones look large. Do not start replacing fuel tank components on the strength of a leak code stored alongside this one.
Dirt, spider webs and insect nests are the classic causes — the assembly breathes outside air, and it is usually mounted low near the tank.
Waarschijnlijke oorzaken
Begin hier
- Filter van het EVAP-systeem verstopt · eenvoudig
- EVAP-referentieopening verstopt · gemiddeld
- Lekdetectiepomp EVAP defect · gemiddeld
Minder vaak
- EVAP-slang verstopt of geknikt · eenvoudig
- EVAP-ontluchtingsweg verstopt · eenvoudig
Symptomen
Betrokken onderdelen
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Ervaring uit de community
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P043E.