P043E: Sistema de emissões evaporativas — fluxo baixo no orifício de referência de detecção de vazamentos
O que fazer
Fix this one before believing any other fuel vapour leak codes. It concerns the reference the system calibrates its leak test against — so while it is faulty, every leak measurement it makes is unreliable. It is worth saying that to the garage before anyone starts replacing fuel tank parts.
The cause is often simply dirt, a spider web or an insect nest in a small filtered vent under the car, which is inexpensive to clear.
The car will drive completely normally. This matters at MOT time, because the emissions self-checks will not complete, and an incomplete monitor can fail the test on its own.
Keep the fuel filler cap properly tightened, since it is part of the sealed system being tested.
O que este código significa
The calibrated reference orifice used to check for fuel vapour leaks is not flowing correctly.
This is one of the more elegant pieces of engineering in emissions control, and understanding it explains the code entirely. The system has to detect a leak the size of a small pinhole in a fuel tank — and how big a leak looks depends on temperature, fuel level and altitude, none of which are constant.
So rather than measure against a fixed number, the system measures against a known hole. A precision orifice, typically half a millimetre, is built into the leak detection assembly. Before testing the tank, the module draws through that orifice and records what a leak of exactly that size looks like today — then compares the tank against it.
This code says the reference itself is unreliable. The orifice is partially blocked, so the calibration is wrong — and every leak test based on it is wrong too.
Which is why this code should be fixed before any leak code is believed. A blocked reference makes real leaks look small and small ones look large. Do not start replacing fuel tank components on the strength of a leak code stored alongside this one.
Dirt, spider webs and insect nests are the classic causes — the assembly breathes outside air, and it is usually mounted low near the tank.
Causas prováveis
Comece aqui
Menos comum
Sintomas
Componentes envolvidos
Informação, não instrução
O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.
Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.
Experiência da comunidade
Seja o primeiro a documentar isto
Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.
O que faz valer a leitura:
- O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
- O que você mediu, não só o que trocou.
- O que realmente resolveu — ou que nada resolveu, o que também vale saber.
Entrar ou criar uma conta para adicionar o que você descobriu sobre P043E.