P051D: Sensor A de pressão do cárter — circuito alto
O que fazer
Ask for the connector to be checked first — including simply that it is plugged in. This sensor sits on the cam cover on many engines, which comes off for spark plugs and gasket work, so one left disconnected after servicing is a common and free-to-fix cause.
Mention any recent work on the top of the engine, however unrelated it seems.
Ask for the sensor's earth connection to be tested, not just its signal wire. A lost earth makes the signal read high and is easy to miss.
Ask for the breather system to be checked at the same time. While this sensor is faulty nothing is watching for a blocked crankcase breather — which is the fault it exists to catch, and the one that pushes oil past the crankshaft seals.
O que este código significa
The crankcase pressure sensor's signal is above the highest voltage the circuit should produce.
High and open are indistinguishable from inside the module, because these inputs carry a pull-up the module sees whenever nothing is loading the circuit. The measurement that separates them is made at the connector with the sensor unplugged, and it takes a minute.
The trivial cause deserves eliminating first. This sensor is mounted on the cam cover on many engines, and the cam cover comes off for spark plugs, coil packs, gaskets and breather work — so a sensor left unplugged after routine servicing is a genuinely common finding and costs nothing to check.
Beyond that, the ordinary open-circuit causes apply: a corroded terminal that has lost contact, a wire broken inside intact insulation where the loom flexes, or a lost earth floating the signal high.
Check the sensor's ground rather than only its signal wire. It is easy to overlook and produces exactly this reading.
A sensor failed internally open is the honest last conclusion. It happens, but everything above it is cheaper and more likely.
Do not skip the breather check while you are there. This sensor's whole purpose is to notice a blocked or disconnected crankcase ventilation system, and a fault in its circuit means nothing is watching for that — which is the real cost of leaving it.
Causas prováveis
Comece aqui
- Circuito aberto na fiação do sensor · moderado
- Sensor deixado desconectado após um serviço anterior · fácil
- Conector corroído ou frouxo · fácil
Menos comum
- Circuito de massa do sensor aberto · moderado
- Sensor de pressão do cárter com defeito · moderado
Sintomas
Componentes envolvidos
Informação, não instrução
O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.
Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.
Experiência da comunidade
Seja o primeiro a documentar isto
Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.
O que faz valer a leitura:
- O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
- O que você mediu, não só o que trocou.
- O que realmente resolveu — ou que nada resolveu, o que também vale saber.
Entrar ou criar uma conta para adicionar o que você descobriu sobre P051D.