P2698: Injetor A de combustível do pós-tratamento dos gases de escapamento — desempenho
O que fazer
Two very different things produce this code, and what you can smell and feel tells them apart.
If there is a strong smell of unburnt diesel from the exhaust, unusual heat from under the vehicle, or a regeneration that seems to go on far longer or hotter than usual — stop and get it looked at. That points to the injector leaking fuel continuously into a hot exhaust, which can overheat and destroy the particulate filter and, in the worst case, is a fire risk. It is not something to continue driving on.
If instead the particulate filter warning keeps appearing and regenerations never seem to finish, that is the ordinary version: the nozzle has coked up with carbon and is not spraying properly. Less urgent, but it will block the filter eventually. Ask whether the nozzle tip and seal can be cleaned or replaced separately — on many vehicles they are a serviceable item and much cheaper than the whole injector.
Either way, mention any change in fuel consumption. A leaking injector shows up there before it shows up anywhere else.
O que este código significa
The exhaust fuel injector is electrically sound and is not delivering what the module commanded — too little, too much, or not when asked. What the injector is for is explained at P2697.
This is the code with a genuine hazard behind one of its readings, and it is worth separating the two.
Under-delivery is the common and unremarkable case. The injector sprays into the exhaust stream, which is the dirtiest environment available, so its nozzle cokes up — carbon builds on the tip until the spray pattern collapses into a dribble or stops. The consequence is a regeneration that never reaches temperature and a filter that loads progressively. On many vehicles the tip and its seal are a serviceable item, so cleaning or replacing the nozzle is a smaller job than replacing the injector.
Over-delivery is the case that matters. A nozzle that no longer seals passes fuel continuously rather than only when dosed, and raw diesel then enters a hot exhaust with no metering at all. Three things follow, in order of seriousness. Unburnt fuel reaching the particulate filter can raise its temperature far beyond the controlled range of a normal regeneration, which cracks or melts the substrate — turning a leaking injector into a filter replacement. Fuel that does not burn drips and accumulates. And an uncontrolled exothermic reaction in an exhaust system under a vehicle is a fire risk, which is why a strong smell of unburnt diesel from the exhaust, or a regeneration that seems unusually hot or unusually long, should be treated as a reason to stop rather than a curiosity.
The distinguishing evidence is available to the driver and worth reporting: a filter that will not regenerate points at under-delivery, while a fuel smell from the exhaust, unusual heat under the vehicle, or fuel consumption that has climbed with no change in driving points at a leaking injector.
This code is marked more serious than its neighbours for that second reading alone.
Causas prováveis
Comece aqui
- Injetor do pós-tratamento de escape carbonizado · moderado
- Injetor do pós-tratamento de escape vazando · moderado
- Injetor do pós-tratamento de escape com defeito · moderado
Menos comum
- Filtro de combustível obstruído · fácil
- Pressão de alimentação de combustível baixa · moderado
- Filtro de partículas diesel entupido · especializado
Sintomas
Componentes envolvidos
Informação, não instrução
O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.
Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.
Experiência da comunidade
Seja o primeiro a documentar isto
Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.
O que faz valer a leitura:
- O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
- O que você mediu, não só o que trocou.
- O que realmente resolveu — ou que nada resolveu, o que também vale saber.
Entrar ou criar uma conta para adicionar o que você descobriu sobre P2698.