Pular para o conteúdo

U0109 Alta Genérico / SAE

U0109: Perda de comunicação com o módulo A de controle da bomba de combustível

WhatsApp Telegram X E-mail

Não continue dirigindo

Depending on the vehicle the engine may stop or refuse to start, or it may drive completely normally while the pump runs at full output all the time.

Either way, get it looked at rather than continuing. If it is currently the version that drives normally, the risk is that it becomes the other version without warning, and stopping in moving traffic is the outcome to avoid.

The module usually lives low down at the back of the car near the fuel tank, which is the worst place on the vehicle for water and road salt — so its connector and wiring are the first things to check, ahead of the module or the pump.

O que este código significa

The fuel pump control module has stopped being heard from. The general reasoning is at U0100.

A fuel pump control module exists to vary pump speed rather than run it flat out — the arrangement described at P2539, where delivering only what is needed saves energy and stops the fuel being warmed by surplus circulation. When the module goes quiet, the pump's behaviour depends on how the design fails, and both directions matter.

  • Fails off, and the engine stops or will not start. Unambiguous, and it will not be mistaken for anything else.
  • Fails to full output, which is the more interesting case: the car drives perfectly. Rail pressure is high, the pump runs at maximum continuously, the fuel warms and the pump wears faster than it should. Nothing is wrong to drive and something is being consumed, which is the shape this corpus keeps finding.

Marked not to be driven because the first outcome can arrive at any moment and stopping in traffic is the consequence.

The module is frequently mounted low at the rear of the vehicle, near the tank, which is the worst place for water and salt — and its connector is a routine finding.

Causas prováveis

Comece aqui

Menos comum

Sintomas

Componentes envolvidos

Informação, não instrução

O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.

Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.

Experiência da comunidade

Seja o primeiro a documentar isto

Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.

O que faz valer a leitura:

  • O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
  • O que você mediu, não só o que trocou.
  • O que realmente resolveu — ou que nada resolveu, o que também vale saber.

Entrar ou criar uma conta para adicionar o que você descobriu sobre U0109.