U0311: Incompatibilidade de software com o módulo de controle do motor de tração
O que fazer
Do not attempt anything under the bonnet, and have the vehicle recovered rather than persisting with it. The high-voltage system runs at several hundred volts and is not something to investigate.
Expect the car not to move at all, or to run on the engine alone if it has one.
That is the car doing the right thing, and it is worth understanding why. This code means two computers are running software that does not agree about what a torque request means. Rather than risk acting on a command it might interpret at the wrong scale — or in the wrong direction — the drive system commands no torque at all and shuts the high-voltage system down.
On a car whose motor can deliver full torque from a standstill, that is a far better answer than the alternatives. Nothing is broken.
One question worth asking yourself: has the car updated its software recently, or been part-way through an update? These systems are updated over the air more than almost anything else on a modern vehicle, and an update that only partly completed is a leading cause. If so, the fix is completing it rather than replacing anything.
Make sure it goes to a workshop equipped for high-voltage work, and tell the recovery operator what the vehicle is when you call.
O que este código significa
A module is running software that does not belong with the drive motor control module's. See U0300 for the family, and note that everything on this page concerns a high-voltage system that is lethal in a way nothing mechanical on a vehicle is — several hundred volts of direct current, orange cabling that is not decorative, and no part of it that a general workshop should open.
A drive motor control module is the interface between a torque request and an inverter that turns hundreds of volts into three precisely timed phases. What a given request means — its scale, its sign, the current limits that bound it, the rotor position offset that keeps the phases aligned to the magnets — is all defined in software.
Which is why the vehicle's response to a mismatch here is not graceful degradation. A drive system that cannot be certain both halves agree about torque commands the safest available value, which is none, and opens the contactors. Expect a vehicle that will not move, or that moves on the engine alone if it has one.
And that is the correct outcome rather than an inconvenience. The failure this prevents is a torque command interpreted at the wrong scale or the wrong sign — a motor delivering far more than was asked for, or driving against the direction of travel. On a vehicle whose motor can produce full torque from rest, neither is survivable to get wrong, and refusing to move is a much better answer than either.
So the practical advice is to have it recovered rather than to persist, and to send it to a workshop equipped for high-voltage work.
Where it comes from is the family's ordinary list, with one addition specific to electric drive. Motor and inverter software is updated more often than almost anything else on these vehicles, frequently over the air, so a partly-completed update is a leading cause — and the remedy is completing it rather than replacing anything.
Causas prováveis
Comece aqui
- Software atualizado em apenas um módulo · especializado
- Programação do módulo interrompida · especializado
- Configuração do módulo errada após a substituição · especializado
Menos comum
- Módulo usado bloqueado em outro veículo · especializado
- Calibração de software desatualizada · especializado
- Módulo não codificado para o veículo · especializado
Sintomas
Componentes envolvidos
Informação, não instrução
O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.
Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.
Experiência da comunidade
Seja o primeiro a documentar isto
Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.
O que faz valer a leitura:
- O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
- O que você mediu, não só o que trocou.
- O que realmente resolveu — ou que nada resolveu, o que também vale saber.
Entrar ou criar uma conta para adicionar o que você descobriu sobre U0311.