Injection Control Pressure Sensor
Reports the pressure of the engine oil used to actuate the injectors on a hydraulically actuated system, so the module can regulate it. Its own characteristic failure is oil wicking along the harness into the connector and the sensor body, which produces readings that drift, stick or vanish — so an oil-filled connector is worth looking for before the sensor is condemned.
Also known as: icp sensor, injection control pressure, oil pressure sensor heui, icp
Referenced by 12 codes
Codes involving this component (12)
- P2283 Injector Control Pressure Sensor Circuit High
- P2284 Injector Control Pressure Sensor Circuit Range/Performance High
- P2285 Injector Control Pressure Sensor Circuit Low High
- P2286 Injector Control Pressure Sensor Circuit High High
- P2287 Injector Control Pressure Sensor Circuit Intermittent High
- P2288 Injector Control Pressure Too High High
- P2290 Injector Control Pressure Too Low Stop driving High
- P2291 Injector Control Pressure Too Low Engine Cranking Stop driving High
- P2292 Injector Control Pressure Erratic High
- P2623 Injector Control Pressure Regulator Circuit Open High
- P2624 Injector Control Pressure Regulator Circuit Low High
- P2289 Injector Control Pressure Too High Engine Off Moderate
Other components in Fuel Delivery
- Fuel Injector 530
- Fuel Injector Control Module 148
- Alternative Fuel Control Module 135
- High-Pressure Fuel Pump 79
- Fuel Rail Pressure Sensor 77
- Fuel Pump 48
- Fuel Volume Regulator 46
- Fuel Temperature Sensor 45
- Fuel Filter 43
- Fuel Level Sensor 27
- Fuel Pump Control Module 22
- Fuel Shutoff Valve 14
- Injection Pump 13
- Fuel Composition Sensor 11
- Injection Pressure Regulator 10
- High-Pressure Oil Pump 8
- Air Assist Control Valve 6
- Water in Fuel Sensor 6
- Fuel Transfer Pump 6
- Fuel Supply Heater 3
- Fuel Pump Strainer 2
Information, not instruction
CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.
Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.
Working on this component
Be the first to write this up
Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.
What makes one worth reading:
- The car — make, model, year and engine. The same fault behaves differently on each.
- What you measured, not only what you replaced.
- What actually fixed it — or that nothing did, which is worth knowing too.
Sign in or create an account to add what you found about Injection Control Pressure Sensor.