B0099: Überrollsensor
Was zu tun ist
Get this looked at promptly, and do not attempt it yourself. A restraint fault usually means the whole system has switched itself off, so the airbags and pretensioners may not fire in a crash — the car drives normally and is far less able to protect you. Never probe airbag wiring with a multimeter: the current an ordinary meter uses can set off the charge.
Was dieser Code bedeutet
The rollover sensor circuit is faulty.
A rollover is a fundamentally different crash from an impact, and it needs a fundamentally different sensor.
An impact is over in about a tenth of a second. A rollover takes one to three seconds — slow enough that an accelerometer looking for a sudden shock sees nothing worth acting on. So the module needs a gyroscope, measuring the rate at which the vehicle is rotating about its length, and it integrates that rate to predict whether the roll will continue past the point of no return.
That prediction is the hard part, because it has to be made while the car is still on its wheels and while a violent avoidance manoeuvre must not be mistaken for a roll. A false deployment at speed would itself cause a crash.
What it fires is different too. Curtain airbags in a rollover are not there to cushion a single blow — they are there to stay inflated for several seconds and keep occupants inside the vehicle, because ejection is what makes rollovers so lethal. A frontal bag deflates almost immediately; a rollover curtain must not.
So a rollover sensor fault removes protection in the crash type most likely to be survivable if the occupants stay in the car, and the vehicles most often fitted with one — tall, narrow, heavy — are the ones most likely to need it.
Wahrscheinliche Ursachen
Hier anfangen
- Korrodierter oder loser Stecker · Fachwerkstatt
- Überrollsensor defekt · Fachwerkstatt
- Kabelbaum beschädigt · Fachwerkstatt
Seltener
- Airbagsteuergerät defekt · Fachwerkstatt
- Wasser in den Stecker eingedrungen · Fachwerkstatt
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu B0099.