C0072: Bremsentemperatur zu hoch
Was zu tun ist
If this came up on a long downhill or during repeated hard braking, stop somewhere safe and let the brakes cool — twenty minutes, without applying the handbrake. Brakes this hot can fade badly and the pedal can go soft. On descents use a lower gear so the engine slows the car. If it appeared during ordinary driving, suspect a binding brake — feel for one wheel much hotter than the others — and have it looked at before driving further.
Was dieser Code bedeutet
The brake temperature is above the expected limit.
This is a real physical condition, not a sensor complaint, and it is the code in this range most worth acting on immediately.
Brakes work by turning motion into heat, and they can only get rid of it so fast. Sustained braking — a long descent, repeated hard stops, towing — puts heat in faster than the discs can shed it. Past a point the pad material stops gripping and the fluid can boil, which puts gas in a system designed to carry liquid. Gas compresses; the pedal goes soft or to the floor.
That is brake fade, and it does not announce itself gently. It arrives on the corner after the one where the brakes still worked.
A dragging brake produces the same code with no provocation at all — a seized caliper slide, a stuck piston, a corroded handbrake cable or a collapsed flexible hose acting as a one-way valve. If this appeared during ordinary driving rather than a hard descent, look for a binding brake, and expect a hot wheel and a smell.
What to do about heat while driving: on a long descent, select a lower gear and let the engine hold the car back rather than riding the brakes, and brake firmly and briefly instead of continuously. Do not park with the handbrake on immediately after — heat soaks into the discs afterwards and can bond the pads.
Wahrscheinliche Ursachen
Hier anfangen
- Schleifender oder klemmender Bremssattel · Fachwerkstatt
- Starkes oder anhaltendes Bremsen · Fachwerkstatt
- Führungsbolzen des Bremssattels festgefressen · Fachwerkstatt
Seltener
- Kollabierter Bremsschlauch wirkt als Rückschlagventil · Fachwerkstatt
- Bremstemperatursensor defekt · Fachwerkstatt
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu C0072.