P04D9: Regelung der Abgasrückführung im geschlossenen Regelkreis an der Grenze — Durchfluss zu niedrig
Was zu tun ist
Ask for the EGR passages to be inspected, not just the valve. On a diesel with miles on it, the ports narrow with hard tar-like deposits until the valve can be wide open and almost nothing flows — and a new valve fitted into blocked passages changes nothing.
Ask whether the intake throttle valve has been checked too. It creates the pressure difference EGR needs to flow, and a carbon-coated one produces this fault with a perfectly good EGR valve.
Expect the repair to be mostly labour — cleaning passages is time rather than parts, and a quote weighted that way is not unreasonable.
Regular longer runs at sustained speed genuinely slow this down, so it is worth asking about driving pattern once it is fixed.
Was dieser Code bedeutet
The module has opened the EGR valve as far as it is permitted to and still cannot get the flow it wants.
This is a correction running out of room, which makes it more informative than an ordinary EGR flow code. The module is not reporting that flow drifted — it is reporting that it tried to fix it, went to the end of its authority, and failed. The restriction is larger than the control can compensate for.
That framing rules out the valve being merely lazy and points at a genuine blockage.
- The EGR passages are coked. This is the dominant cause on any diesel with mileage: the ports through the head or manifold narrow with a hard tar-like deposit until the valve can be wide open and very little passes.
- The cooler is blocked, which does the same thing further along the path.
- The valve is not physically opening as far as its position sensor claims, so the feedback is satisfied while the gas is not moving.
- There is not enough pressure difference to drive the flow — on a diesel that usually means the intake throttle is not creating the depression EGR needs.
That last one is worth checking early because it is cheap and commonly missed. A carbon-coated intake throttle produces low EGR flow with a perfectly good EGR valve, and the two faults look identical from the flow measurement alone.
Expect the passages to need physical cleaning, which is labour rather than parts.
Wahrscheinliche Ursachen
Hier anfangen
- AGR-Kanal verstopft · mittel
- Rußablagerungen im AGR-System · mittel
- AGR-Kühler mit Ruß zugesetzt · mittel
Seltener
- AGR-Drosselklappe mit Ruß bedeckt · mittel
- AGR-Ventil hängt oder ist festgefressen · mittel
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu P04D9.