Zum Inhalt springen

P0401 Mittel Generisch / SAE

P0401: Abgasrückführung A — Unzureichender Durchfluss erkannt

WhatsApp Telegram X E-Mail

Was zu tun ist

The car will usually drive normally, and this is often found only at an emissions test. Ask whether the EGR passages were checked and not just the valve — replacing the valve alone is the classic way this fault comes back.

Was dieser Code bedeutet

Less exhaust gas is reaching the intake than the module asked for. This is by a wide margin the most common EGR fault, and on most engines the cause is not the valve but the passage behind it: exhaust gas carries soot, the passage narrows over years, and eventually the restriction is enough that a fully open valve still cannot flow the commanded quantity.

That distinction matters commercially. A valve is a part; a blocked passage is labour. Replacing the valve on an engine whose passages are packed solid produces a car that passes for a few thousand miles and returns with the same code, which is a common and avoidable outcome. Before condemning the valve, check whether it moves freely and whether the port behind it is open — on many engines the intake-side port can be seen with the valve removed.

The other pattern worth knowing is the vacuum-operated system with a healthy valve and no vacuum reaching it. Applying vacuum directly to the valve at idle should stall or badly disturb the engine. If it does, the valve and passage are fine and the fault is upstream in the solenoid or its hoses.

Wahrscheinliche Ursachen

Hier anfangen

Seltener

Symptome

Beteiligte Bauteile

Information, keine Handlungsanweisung

CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.

Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.

Erfahrungen der Community (1)

Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu P0401.