P0C9C: Stromsensor B des 14-Volt-Leistungsmoduls — Stromkreis
Was zu tun ist
This is the measurement behind the car's judgement of whether the 12-volt battery is being charged or drained, so a fault here can produce battery warnings on a healthy battery — or, worse, silence about one that is genuinely failing. If the 12-volt battery has been flat, mention it: this code and P0C38 are the two that explain it without the battery being at fault.
Was dieser Code bedeutet
The second current sensor on the 14 volt power module has a circuit fault.
The 14 volt power module is what keeps the ordinary car alive, and sensor A is already written at P0A86. It converts the traction pack down to the supply that runs the lights, the modules, the pumps and the locks — the alternator's job, done by electronics.
What this sensor measures is not how much the module is producing but which way the 12-volt system's energy is flowing, and that distinction is the whole point. Current into the battery means it is being charged; current out means it is being drained. So this is how the car knows whether it will start tomorrow morning, and it is the measurement behind a warning that the vehicle may not restart.
Two sensors exist for the reason two exist anywhere in this corpus: a single sensor drifting is undetectable and two disagreeing is not — the argument written out at P0B13 for the traction pack, applied to the low-voltage side.
The symptom of a fault here is rarely dramatic and often misread: a car that reports battery warnings with a healthy battery, or one that quietly stops warning about a battery that genuinely is failing.
Wahrscheinliche Ursachen
Hier anfangen
- Batteriestromsensor defekt · Fachwerkstatt
- Korrodierter oder loser Stecker · einfach
Seltener
- DC-DC-Wandler defekt · Fachwerkstatt
- Referenzspannungsversorgung des Sensors ausgefallen · mittel
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu P0C9C.