P0D7F: Motor des Klimakompressors — Strom Phase W hoch
Was zu tun ist
Air conditioning will be weak or absent, and on a heat-pump car so will heating. The compressor may be audibly rough. The car drives normally, but an unbalanced motor damages itself, so this should not be left.
Was dieser Code bedeutet
The current in one of the compressor motor's three phases is outside its expected range.
The compressor's motor is three-phase, and its three currents are measured separately for a reason worth knowing.
A three-phase motor is fed by three windings energised in rotation, and in a healthy machine the three currents are equal in magnitude and evenly spaced in time. So the comparison between them is diagnostic in a way no single reading is.
One phase wrong is the motor or its driver — a shorted or open winding, a failed transistor in that leg of the inverter, or a connection on that phase. All three wrong together is the supply or the load: the direct-current feed, or a compressor that is mechanically hard to turn.
This is the same structure as the traction motor's phase codes at P0A5D and P0BE5, and the reasoning transfers directly — including the identity that lets the module audit itself, since three phase currents in a balanced motor must sum to zero at every instant.
Phase W is carrying more current than the other two. Usually a shorted turn in that winding or a driver failing on, and it is the more urgent direction: an over-current on one phase heats one winding while the other two run normally, so the damage concentrates.
Wahrscheinliche Ursachen
Hier anfangen
- Elektrischer Klimakompressor defekt · Fachwerkstatt
- Korrodierter oder loser Stecker · Fachwerkstatt
Seltener
- Durchschlag der Wicklungsisolierung des Motors · Fachwerkstatt
- Kabelbaum beschädigt · Fachwerkstatt
Selten
- Falsches Kompressoröl in einem Hochvoltsystem · Fachwerkstatt
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu P0D7F.