P2109: Positionssensor A von Drosselklappe oder Pedal — Funktion des unteren Anschlags
Was zu tun ist
Often a cheap fix. Ask for the throttle body to be cleaned and the throttle relearn procedure carried out before any part is quoted — the position is learned, and carbon slowly moves it out of range. Also worth knowing: if the throttle body was cleaned recently and this code appeared afterwards, the relearn was probably skipped.
Was dieser Code bedeutet
The learned closed position of throttle or pedal sensor A no longer matches what the module expects. This looks like an obscure code and is one of the more useful ones in the range, because it usually has a cheap answer.
What the minimum stop is. The throttle plate cannot close completely — it rests against a mechanical stop that leaves it very slightly open, which is what lets the engine idle if the motor loses power. The module learns exactly where that stop sits, because the position matters to a fraction of a degree: everything the throttle does is measured from it.
Why it drifts. Carbon builds around the plate, so the plate comes to rest a little further open each year than it did when the value was learned. Eventually the learned figure and the real one differ enough for the module to notice. The throttle body is not broken and the sensor is not broken — the reference has moved.
Which makes the repair cheap when it is caught here. Clean the throttle body and run the relearn procedure, and the reference is correct again. Skipping the relearn after cleaning is a common way to produce this code deliberately: the plate now closes further than the module expects, which is the same disagreement in the other direction.
This is the same shape as the clutch adaptation under P0810 and the gearbox actuator calibration under P0909 — an adaptive system reporting that reality has drifted past what it can absorb, rather than a part having failed.
Wahrscheinliche Ursachen
Hier anfangen
Seltener
- Drosselklappenpotentiometer defekt · mittel
- Schwache Rückstellfeder der Drosselklappe · mittel
- Fahrpedalstellungssensor defekt · einfach
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu P2109.