U0330: Softwareinkompatibilität mit dem Reifendruckkontrollmodul
Was zu tun ist
Check your tyre pressures by hand with a gauge, and keep doing it every couple of weeks until this is fixed. That is the important part. An under-inflated tyre overheats, wears out quickly, handles badly and can fail at speed — and the system that would have warned you is not working.
Nothing is broken. This code means two computers are running software that does not belong together.
Three things cause it, and any of them may be your answer.
Was the car imported? Tyre pressure monitoring is a legal requirement with different rules in different countries, so a car brought in from elsewhere often carries another market's settings.
Has a module or instrument cluster been replaced with a part bought online? Same problem — parts from another market carry that market's rules.
Do you have a second set of wheels, for winter? If those wheels have no sensors in them and your car is set up to expect sensors, it will never be satisfied — and that is a settings question rather than a fault.
One thing to expect after it is fixed. The car has to be taught which sensor is at which corner. Until that is done it will either report nothing or report the wrong pressure against the wrong wheel — a procedure rather than a fault, and skipping it is how a "fixed" system still tells you the wrong thing.
Was dieser Code bedeutet
A module is running software that does not belong with the tyre pressure monitor module's. See U0300 for the family and U0127 for the system itself.
The safety framing outranks the diagnosis, exactly as it does at U0127: an under-inflated tyre overheats, wears out, handles badly and can fail at speed. With the monitoring unavailable, pressures need checking by hand with a gauge, regularly — and that is the whole of what a driver needs to do about this.
What makes this code more likely than most of its neighbours is that tyre pressure monitoring is regulated, and regulated differently in different places.
Two entirely different systems carry the same name. A direct system reads a radio transmitter inside each wheel and reports actual pressures. An indirect system has no sensors at all — it infers a soft tyre from wheel speed, because an under-inflated tyre has a smaller rolling radius and turns fractionally faster. Which of the two a vehicle has is configuration, and so are the warning thresholds, the relearn procedure and whether a spare is monitored.
So the routes into this code are specific and recognisable.
- An imported vehicle, whose modules carry another market's rules.
- A module or cluster replaced with one from a different market, which is very common on parts bought online.
- A vehicle switched between direct and indirect systems during a wheel change — a set of winter wheels without sensors on a car configured for direct monitoring will never satisfy it, and that is a configuration question rather than a fault.
One thing worth expecting after the software is corrected. A direct system must be taught which sensor is at which corner, and until that relearn is done the vehicle either reports nothing or reports pressures against the wrong wheels. It is a procedure rather than a fault, and skipping it is how a repaired system still tells the driver the wrong thing.
Wahrscheinliche Ursachen
Hier anfangen
- Falsche Konfiguration des Steuergeräts nach dem Tausch · Fachwerkstatt
- Gebrauchtes Steuergerät auf ein anderes Fahrzeug gesperrt · Fachwerkstatt
- Steuergerät nicht auf das Fahrzeug codiert · Fachwerkstatt
Seltener
- Software nur an einem Steuergerät aktualisiert · Fachwerkstatt
- Sensor nach dem Tausch nicht angelernt · einfach
- Softwarekalibrierung veraltet · Fachwerkstatt
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu U0330.