P064C: Calculateur de bougies de préchauffage 1
Que faire
Ask for the glow plugs themselves to be tested before the control module is replaced. A plug that has gone short circuit can destroy the module's output — and a new module fitted without finding that short fails the same way.
Expect hard starting in cold weather, white smoke, and rough running for the first minute or two. On a modern diesel the glow plugs keep working after the engine starts to control emissions, so this is an emissions fault as well as a starting one.
Mention how the car behaves on a cold morning specifically, since that is when this fault shows itself.
Ask for the module's connector and earth to be inspected, as these carry heavy current and fail at the connections.
Ce que signifie ce code
A fault has been reported by or about the first glow plug control module.
Glow plugs are no longer simply switched on for a few seconds before cranking, and understanding what changed explains this whole family of codes. A modern glow plug control module drives each plug individually with a pulse-width-modulated supply, controlling its temperature precisely — and it keeps them running for minutes after the engine has started.
That post-start glowing is emissions work rather than starting help. It keeps combustion stable while the engine is cold, which cuts the white smoke and the unburnt hydrocarbons a cold diesel would otherwise produce. Which is why a glow plug fault is an emissions fault on a modern diesel and not merely a cold-starting inconvenience.
The module also measures each plug's resistance to work out its temperature, and reports faults per cylinder — which is where the rest of this block's glow plug codes come from.
A module fault is often the consequence of a plug rather than its own failure. A glow plug that has gone short circuit drags its driver down and can destroy it, so measure the plugs before replacing the module — otherwise the new one meets the same short.
These modules sit in a hot part of the engine bay and carry heavy current, so check the connector for heat damage and the earth for corrosion before condemning the unit.
Causes probables
Commencez ici
- Bougie de préchauffage hors service · modérée
- Calculateur de préchauffage hors service · modérée
- Connecteur corrodé ou mal enclenché · facile
Moins fréquent
- Fusible du circuit de préchauffage grillé · facile
- Mauvaise masse du capteur · modérée
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de P064C.