Aller au contenu

P0D6C Modérée Générique / SAE

P0D6C: Capteur A de tension du moteur du compresseur de climatisation — circuit intermittent/erratique

WhatsApp Telegram X E-mail

Que faire

Expect no air conditioning, and on a car with a heat pump, no cabin heating either. The car will drive. In warm weather watch for slower rapid charging as well — on many cars this compressor also cools the battery.

Ce que signifie ce code

The circuit for the sensor measuring the supply voltage at the electric air conditioning compressor's motor is faulty.

An electric car's air conditioning compressor is a high-voltage machine, and almost everything that follows from that surprises people who know conventional systems.

A belt-driven compressor stops when the engine stops. That is tolerable on a petrol car because the engine only stops when the car does. On a hybrid the engine stops at every set of lights, and on an electric car there is no engine at all — so the compressor has to be driven by its own motor, fed from the traction pack at several hundred volts, with its own inverter to turn that direct current into the three-phase supply the motor needs. That inverter is why this block has phase current codes for an air conditioning part.

Two consequences change what a fault here means. First, on many cars this same compressor cools the battery, so an air conditioning failure becomes a charging and power failure in warm weather — the driver reports a hot cabin and the car quietly reports reduced rapid-charging. Second, a heat pump runs this compressor in reverse to heat the cabin, so on a car with one, losing the compressor loses the heating too, in winter, when nobody suspects air conditioning.

And the repair carries a hazard that has no equivalent on a conventional system: the oil. A high-voltage compressor is lubricated by a specific non-conductive polyolester oil carried in the refrigerant. The PAG oil used in every belt-driven system absorbs moisture and conducts — put it into a high-voltage compressor and it degrades the motor's insulation, which can energise the refrigerant circuit and the metal pipework running through the car. This is a real and repeated workshop error, not a theoretical one, and it is the reason these systems must be serviced with dedicated equipment that has never seen PAG oil.

This particular sensor is how the compressor's inverter knows what it has to work with, and without it the inverter cannot set its switching correctly, so it shuts down rather than guess.

Comes and goes. Found by moving the harness with the reading live, not by measuring at rest.

Causes probables

Commencez ici

Moins fréquent

Symptômes

Composants concernés

Des informations, pas des instructions

CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.

Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.

Expérience de la communauté

Soyez le premier à en faire le compte rendu

Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.

Ce qui rend un compte rendu utile :

  • La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
  • Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
  • Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.

Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de P0D6C.