P2423: Catalyseur d'adsorption des hydrocarbures — efficacité sous le seuil, banc 1
Que faire
The car will drive normally — this device only does anything in the first minute after a cold start, so there is nothing to feel. It will fail an emissions test. Before agreeing to replace it, ask whether the oxygen sensors have been verified, because the efficiency judgement is calculated from them and a drifting sensor condemns a healthy exhaust component. This is not a repair to rush into on the strength of one code.
Ce que signifie ce code
The hydrocarbon adsorption catalyst on bank 1 is not storing and releasing as it should.
This device solves the same problem as secondary air injection, by the opposite method. The problem is that the first minute after a cold start produces the worst emissions a car makes, because the catalyst converts almost nothing until it is hot. Secondary air injection attacks it by burning the unburnt fuel early, generating heat — that is P2257. An adsorption catalyst instead simply traps the hydrocarbons on a zeolite substrate, holds them while the exhaust is cold, and releases them back into the stream once the main catalyst is up to temperature and able to deal with them.
So it is a delay line rather than a converter, and that shapes what failure looks like. It does not stop working suddenly. The substrate loses storage capacity gradually with age, thermal cycling and contamination, so the code appears when capacity has fallen below what the strategy assumes rather than when something breaks. There is usually no symptom at all — the driver notices nothing, and the fault is found at an emissions test or by the warning light.
Before concluding the trap itself is finished, the same caution applies as for any catalyst efficiency code: the judgement is made using oxygen sensors, so a sensor reporting inaccurately produces this verdict on a healthy device. The corpus makes that argument at P2270 and P2232, and it is worth the same weight here, because this is an expensive exhaust component.
Causes probables
Commencez ici
- Support d'adsorbeur d'hydrocarbures dégradé · spécialisée
- Sonde lambda défectueuse · modérée
Moins fréquent
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de P2423.