P2682: Vanne A de dérivation du circuit de refroidissement moteur — circuit de commande bas
Que faire
Expect slow warm-up, a cool-running engine and a weak heater. Not dangerous.
Ask for the connector and the thermostat housing to be checked for coolant leakage before the valve is replaced. This valve is mounted on or in the thermostat housing, surrounded by seals and hose joints, and on many engines that housing is plastic and goes porous with age. A slight weep drips coolant into the plug, and because coolant conducts and corrodes it causes a real electrical fault with nothing wrong with the wiring. If that is what has happened, the housing is the repair and the valve may be perfectly good.
As at P2681, do not let a thermostat be fitted on the assumption that slow warm-up must be one — on this engine the temperature is controlled electrically.
Ce que signifie ce code
The coolant bypass valve's control circuit reads below its valid range — a short to ground, or a module output that has failed low.
What the valve does, and why slow warm-up on these engines is not automatically a thermostat, is set out at P2681.
The coolant-in-the-connector mechanism described at P2679 applies here with particular force, because of where this valve is mounted. It is part of the thermostat housing or bolted directly to it — surrounded by hose joints, seals and, on many engines, a plastic housing that becomes porous with age. A housing that has begun to weep puts coolant straight onto its own connector, and the electrical fault that follows names the valve while the actual problem is a leaking housing that will need replacing anyway.
So the sequence to insist on is: look at the plug and the housing before the valve is condemned. If there is coolant in the connector, finding where it came from is the repair, and the valve may well be fine.
The driveability consequence is as at P2681 — a cool-running engine rather than an overheating one, in most designs.
Causes probables
Commencez ici
Moins fréquent
- Étage de puissance du calculateur hors service · spécialisée
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de P2682.