Aller au contenu

P27A1 Modérée Générique / SAE

P27A1: Pompe à huile de boîte électrique ou auxiliaire A — bloqué activé

WhatsApp Telegram X E-mail

Que faire

The car will drive normally — the risks are heat and a flat battery. A pump that will not switch off keeps drawing current after the engine stops, so a mysteriously flat 12-volt battery and this code are one problem, not two. Until it is repaired, expect the battery to need help sooner rather than later, and have the car looked at promptly.

Ce que signifie ce code

Electric auxiliary transmission fluid pump A keeps running when commanded off — stuck on.

Stuck on is the variant that costs you a battery. A pump that keeps running after it is commanded off draws current with the engine stopped — including overnight. It also churns fluid it no longer needs to move, which adds heat. A car with this code and a 12-volt battery that keeps going flat is one fault, not two.

This pump exists for the moments the engine is off. A conventional automatic makes its hydraulic pressure with a pump driven by the engine, so at a stop-start red light — engine stopped — pressure would drain away, and the first metre of drive would arrive with a thump while the mechanical pump refilled the circuit. The electric auxiliary pump holds pressure through those stops, so the clutches are already applied when the engine restarts. Hybrids lean on it even harder, because their engine stops whenever the battery can carry the load.

Which is why the commonest symptom is no symptom at all — except stop-start quietly giving up. The module knows it cannot hold pressure through an engine stop, so it stops allowing them. A car that used to switch off at the lights and no longer does, with this code stored, has already told you what is wrong. Where stops do still happen, the tell is a pause or a shunt as the car pulls away afterwards.

Causes probables

Commencez ici

Moins fréquent

Rare

Symptômes

Composants concernés

Des informations, pas des instructions

CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.

Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.

Expérience de la communauté

Soyez le premier à en faire le compte rendu

Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.

Ce qui rend un compte rendu utile :

  • La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
  • Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
  • Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.

Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de P27A1.