Aller au contenu

U0150 Modérée Générique / SAE

U0150: Perte de communication avec la passerelle E de données série

WhatsApp Telegram X E-mail

Que faire

Expect equipment on the specialist or converted part of the vehicle to have stopped working — body equipment, a tail-lift, habitation systems, tracking or tachograph functions — rather than anything to do with driving.

Five of these translator modules means a vehicle that has been built up by more than one company: the manufacturer, then a body builder, often an equipment installer after that. Each of them added a network boundary, and each boundary is where wiring from two different designs meets.

So the single most useful thing you can do is work out who fitted what, before anyone starts testing. A franchised dealer has the drawings for the base vehicle and nothing else; the converter has theirs and may not know what was added later. A fault at a join that nobody has drawings for is what turns this into a long and expensive search.

On an ordinary car, this almost certainly means the car has been told it has equipment it does not have — which happens after a second-hand module is fitted from a better-equipped vehicle. Correcting the coding is the fix, and there is no fault to find.

The vehicle is normally safe to drive. Do not use any affected body equipment, trailer or lifting gear until it has been checked.

Ce que signifie ce code

A fifth gateway module has stopped being heard from. See U0146 for what a silent gateway does to everything behind it, U0148 for the converted-vehicle argument, and U0451 for the same module reporting implausibly instead.

Five gateways puts the vehicle firmly outside the passenger-car world, and the useful consequence is about who should look at it rather than about what has failed.

A vehicle with this many separate networks has almost certainly been through more than one pair of hands — the manufacturer, a body builder, and often a fleet or equipment installer after that. Each of them added a boundary, and each boundary is a place where wiring from two different designs meets.

Which produces the practical instruction: establish who fitted what before anyone starts testing. A franchised dealer has drawings for the base vehicle and nothing beyond it; the converter has drawings for their own work and may not know what was added afterwards. A fault at a join neither of them documented is what turns this into a long and expensive search, and the way to avoid that is to assemble the history first.

And the U0145 question still applies with full force: on a vehicle that has had second-hand modules fitted, a gateway coded as present but never installed reports this permanently with nothing to find.

Causes probables

Commencez ici

Moins fréquent

Symptômes

Composants concernés

Des informations, pas des instructions

CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.

Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.

Expérience de la communauté

Soyez le premier à en faire le compte rendu

Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.

Ce qui rend un compte rendu utile :

  • La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
  • Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
  • Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.

Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de U0150.