U0306: Incompatibilité logicielle avec le calculateur d'injecteurs
Que faire
Nothing is broken, but there is one thing to insist on when this is fixed, and it is easy to miss.
This code means two of the car's computers are running software that does not belong together. It is a programming job, not a repair.
The reason it matters more than most is the injectors. Each diesel injector on your engine carries its own calibration code, printed on it and typed into the computer, because no two injectors deliver exactly the same amount of fuel. The computer applies those corrections on every single injection.
A software mismatch can leave those corrections stored in a form the other computer reads differently — so the engine runs with corrections that do not match the injectors actually fitted. You may notice an uneven idle, a harder knock from one cylinder, some smoke, or worse economy, and there may be no other fault code at all.
So when the software is put right, ask specifically for the stored injector codes to be read back and checked against the numbers printed on the injectors. It takes five minutes, it is skipped almost every time, and it is the difference between a repair that is finished and one that is merely quiet.
Ce que signifie ce code
A module is running software that does not belong with the fuel injector control module's. See U0300 for the family and U0301 for why the named module is not the accused.
There is one consequence here that is worth more than the rest of the page, and it connects to the injector calibration argument at P2690.
A common-rail injector carries an individual calibration code, printed on its body and entered into the module against the cylinder it is fitted to, because manufacturing tolerances make two identical injectors deliver measurably different quantities. The module applies those corrections on every injection.
The format and meaning of those codes is defined in software. So a module pair at different calibration levels may store, exchange or interpret the correction values differently — and the result is not a fault the vehicle can see. It is an engine running with per-cylinder corrections that no longer correspond to the injectors fitted.
That produces the P2690 failure without the P2690 code: uneven idle, a harder knocking note from one cylinder, smoke, worse economy, and over time a cylinder over-fuelled by a correction meant for a different injector — a slow risk to the piston and valves rather than an immediate one, but real.
So the instruction is specific and it prevents a repeat. After this is resolved, have the stored injector calibration codes read back and compared against the codes printed on the injectors themselves. A software correction can leave the values intact, migrate them, or lose them, and only reading them back tells you which — a five-minute check that is skipped almost every time and that turns an uncertain repair into a settled one.
Causes probables
Commencez ici
- Logiciel mis à jour sur un seul calculateur · spécialisée
- Configuration du calculateur erronée après remplacement · spécialisée
- Injecteur monté sans saisie de son code de calibrage · spécialisée
Moins fréquent
- Calculateur d'occasion verrouillé sur un autre véhicule · spécialisée
- Programmation du calculateur interrompue · spécialisée
- Calibrage logiciel obsolète · spécialisée
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de U0306.