U0306: Incompatibilidade de software com o módulo de controle dos injetores
O que fazer
Nothing is broken, but there is one thing to insist on when this is fixed, and it is easy to miss.
This code means two of the car's computers are running software that does not belong together. It is a programming job, not a repair.
The reason it matters more than most is the injectors. Each diesel injector on your engine carries its own calibration code, printed on it and typed into the computer, because no two injectors deliver exactly the same amount of fuel. The computer applies those corrections on every single injection.
A software mismatch can leave those corrections stored in a form the other computer reads differently — so the engine runs with corrections that do not match the injectors actually fitted. You may notice an uneven idle, a harder knock from one cylinder, some smoke, or worse economy, and there may be no other fault code at all.
So when the software is put right, ask specifically for the stored injector codes to be read back and checked against the numbers printed on the injectors. It takes five minutes, it is skipped almost every time, and it is the difference between a repair that is finished and one that is merely quiet.
O que este código significa
A module is running software that does not belong with the fuel injector control module's. See U0300 for the family and U0301 for why the named module is not the accused.
There is one consequence here that is worth more than the rest of the page, and it connects to the injector calibration argument at P2690.
A common-rail injector carries an individual calibration code, printed on its body and entered into the module against the cylinder it is fitted to, because manufacturing tolerances make two identical injectors deliver measurably different quantities. The module applies those corrections on every injection.
The format and meaning of those codes is defined in software. So a module pair at different calibration levels may store, exchange or interpret the correction values differently — and the result is not a fault the vehicle can see. It is an engine running with per-cylinder corrections that no longer correspond to the injectors fitted.
That produces the P2690 failure without the P2690 code: uneven idle, a harder knocking note from one cylinder, smoke, worse economy, and over time a cylinder over-fuelled by a correction meant for a different injector — a slow risk to the piston and valves rather than an immediate one, but real.
So the instruction is specific and it prevents a repeat. After this is resolved, have the stored injector calibration codes read back and compared against the codes printed on the injectors themselves. A software correction can leave the values intact, migrate them, or lose them, and only reading them back tells you which — a five-minute check that is skipped almost every time and that turns an uncertain repair into a settled one.
Causas prováveis
Comece aqui
- Software atualizado em apenas um módulo · especializado
- Configuração do módulo errada após a substituição · especializado
- Injetor instalado sem inserir seu código de calibração · especializado
Menos comum
- Módulo usado bloqueado em outro veículo · especializado
- Programação do módulo interrompida · especializado
- Calibração de software desatualizada · especializado
Sintomas
Componentes envolvidos
Informação, não instrução
O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.
Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.
Experiência da comunidade
Seja o primeiro a documentar isto
Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.
O que faz valer a leitura:
- O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
- O que você mediu, não só o que trocou.
- O que realmente resolveu — ou que nada resolveu, o que também vale saber.
Entrar ou criar uma conta para adicionar o que você descobriu sobre U0306.