U0411: Données non valides reçues du calculateur A du moteur de traction
Que faire
Expect much less power, or the electric drive not working at all. That limiting is deliberate — an electric motor can produce enormous torque instantly, so the car will not act on a torque figure it cannot verify.
Report how the car feels, because it genuinely narrows the fault. A drive that feels rough, jerky or notchy, or a whine that has changed character, points at the position sensor on the motor shaft — the part that tells the controller exactly where the rotor is. That is a different repair from anything electrical elsewhere.
Drive gently and get it seen rather than continuing a long journey. On a hybrid the engine may carry you; on an electric car the remaining performance may be very limited.
Do not investigate anything orange. Orange cabling marks the high-voltage system and those voltages are lethal on contact — and the sensor wiring here runs right alongside it. This needs somebody trained and equipped for high-voltage work.
Ce que signifie ce code
The drive motor control module is broadcasting data that cannot be accepted as true. See U0400 for the family's framing and U0292 for what this module does.
On an electric or hybrid vehicle the motor control module publishes the values the whole powertrain is arbitrated around: torque delivered, motor speed, rotor position, temperature and current drawn. The supervisory module at U0293 balances engine and motor using exactly these numbers.
Torque is the value with the most serious implications, and it is why this code sits at high severity. An electric motor can produce very large torque instantly and at any speed, so a torque report that cannot be verified is one the vehicle will not allow to be acted upon. Expect substantially reduced power or a refusal to use the motor at all — which is protection, and is the same reasoning as the throttle supervision at U0408.
Rotor position deserves specific mention because it is the value most often behind this code and it is genuinely hard to fake. A traction motor is commutated electronically: the controller must know exactly where the rotor is, to a fraction of a turn, in order to energise the right windings at the right instant. That comes from a resolver or encoder on the motor shaft. A resolver whose signal has degraded — through heat, vibration or a damaged shielded cable — produces position data that cannot be reconciled with the motor's speed, and the controller correctly refuses to drive on it.
That has a practical consequence worth reporting: a rough, jerky or notchy feel from the drive, or a whine that changes character, points at position feedback rather than at anything electrical elsewhere.
The high-voltage caution stands. Orange cabling, lethal voltages, and the resolver's cable runs alongside it — nothing here is for home investigation.
Causes probables
Commencez ici
- Entrée du calculateur récepteur défectueuse · spécialisée
- Câblage du bus de données endommagé · modérée
- Connecteur corrodé ou mal enclenché · facile
- Dommage thermique au capteur ou au câblage · modérée
Moins fréquent
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de U0411.