P07A7: Elemento de atrito C da transmissão — travado ativado
Não continue dirigindo
Stop driving it and have it recovered. An element that will not release means the gearbox can end up demanding two gears at once — which can lock the driven wheels and is why this is a stop-driving fault rather than one to book in for next week.
Do not keep driving to "see if it clears". The parts that are supposed to be driving are working against one that is holding, and that ruins the gearbox in a very short distance.
Say what fluid was last put in and by whom. The wrong specification swells the seals, which is a genuine route into this fault — and one that a rebuild will not prevent from recurring if the same fluid goes back in.
Mention any harsh engagement, binding, or the car feeling held back before this happened.
O que este código significa
The third friction element is not releasing when it should.
Stuck on is a different problem from slipping and considerably more dangerous, and the reason needs stating plainly.
Every gear is a particular combination of elements applied and the rest released. An element that will not release stays applied into the next gear — so two combinations are demanded at once, and the gearbox fights itself. That is a tie-up.
A tie-up can lock the driveline. At speed, a transmission that binds behaves like a sudden brake on the driven wheels — which is why this code is treated as not drivable rather than merely a fault to book in.
It also destroys the gearbox quickly. The elements that are supposed to be driving are working against one that is holding, so the friction material and the fluid are ruined in a short distance.
The causes are hydraulic rather than about wear:
- A valve stuck in the valve body, so the apply pressure is never released. This is the commonest.
- Debris holding a valve or a check ball off its seat — and debris means something inside is already wearing.
- A broken return spring, or a piston seal swollen by the wrong fluid so it cannot retract.
- A solenoid stuck energised.
Ask about fluid specification specifically. Wrong fluid swells seals, and that is a route into this fault that a rebuild alone will not prevent from happening again.
Causas prováveis
Comece aqui
- Válvula travada no corpo de válvulas · especializado
- Detritos no fluido da transmissão · especializado
- Solenoide de troca de marcha inoperante · especializado
Menos comum
- Fluido da transmissão baixo ou degradado · moderado
- Corpo de válvulas desgastado · especializado
Sintomas
Componentes envolvidos
Informação, não instrução
O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.
Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.
Experiência da comunidade
Seja o primeiro a documentar isto
Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.
O que faz valer a leitura:
- O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
- O que você mediu, não só o que trocou.
- O que realmente resolveu — ou que nada resolveu, o que também vale saber.
Entrar ou criar uma conta para adicionar o que você descobriu sobre P07A7.