Pular para o conteúdo

P0B37 Alta Genérico / SAE

P0B37: Desconector de serviço de alta tensão aberto

WhatsApp Telegram X E-mail

Não continue dirigindo

The likeliest explanation is that the plug is out or not fully latched after recent work — mention any recent service or repair immediately, because that turns a recovery into a two-minute fix. If this appeared after any collision or impact near the battery, do not investigate it and do not attempt to move the vehicle: keep clear and call for professional recovery. And whatever the circumstances, this circuit must never be bridged or bypassed to make the car drivable.

O que este código significa

The service disconnect is open. Not a circuit fault — the loop is genuinely broken, and as far as the vehicle is concerned the traction battery is currently split.

This is the one code in the group that is usually not a fault at all. It is the car correctly reporting that its main safety device has been removed or released, and the overwhelmingly likely reason is that somebody did exactly that: the plug is out, or it was refitted without being latched, and the vehicle has been asked to start before the job was finished.

So the sequence to check is short and free. Has anything been done to this vehicle recently — a service, a battery inspection, a coolant repair, bodywork near the pack, a recovery? If so, the disconnect is the first thing to look at, and reseating it correctly resolves the great majority of these.

When the answer is genuinely no, the readings that remain are a latch that has vibrated loose, a corroded contact that has finally stopped making, or collision damage to the pack area. The last of those deserves its own caution: after any impact near the battery, a broken interlock is a reason to keep away from the vehicle rather than to investigate it.

What the disconnect is for, and the rule that it is never bypassed, are at P0B33 — and that rule is at its most tempting and its most dangerous here, because the car is immobile and the loop looks like a simple switch.

Causas prováveis

Comece aqui

Menos comum

Sintomas

Componentes envolvidos

Informação, não instrução

O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.

Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.

Experiência da comunidade

Seja o primeiro a documentar isto

Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.

O que faz valer a leitura:

  • O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
  • O que você mediu, não só o que trocou.
  • O que realmente resolveu — ou que nada resolveu, o que também vale saber.

Entrar ou criar uma conta para adicionar o que você descobriu sobre P0B37.