P2270: Sensor de O2 — sinal desviado ou travado em pobre, banco 1 sensor 2
O que fazer
The car will usually drive normally — this sensor does not control fuelling, it monitors the catalytic converter. If a converter has been diagnosed alongside this code, do not agree to it yet. The converter verdict is calculated from this sensor, so a stuck one makes that judgement worthless in both directions: it can condemn a good converter or hide a dead one. Repair this first, have the monitor re-run, and see what the result is then.
O que este código significa
The post-catalyst sensor on bank 1 reports lean and will not report anything else.
The confusing part is that a downstream sensor is supposed to sit fairly still. Upstream, a healthy signal oscillates several times a second — that is the whole argument at P2195. Downstream of a working catalyst it should do almost the opposite: the converter stores and releases oxygen, which smooths the switching out, so a lazy, slow-moving rear signal is the sign of a healthy catalyst rather than a failing sensor. Comparing the two sensors' activity is exactly how the catalyst monitor works.
So "stuck" means something stronger here than it does upstream, and the module tests for it differently — it looks for the rear sensor failing to respond even when the mixture is deliberately driven well away from ideal, which a working sensor must still follow.
The money argument is the one this position always carries. The catalyst monitor is computed from this sensor, so a stuck one corrupts that judgement in whichever direction happens to apply:
- It can falsely condemn a good converter, because a rear signal that never moves is the signature the monitor looks for when a catalyst has stopped storing oxygen. A P0420 alongside this code is very probably not a failed converter.
- It can equally hide a genuinely dead one, if the stuck value happens to sit where the monitor expects a healthy catalyst to hold it.
Either way the converter verdict is unreliable until this sensor is right, and a converter costs many times what this sensor does. Fix this first and re-run the monitor before accepting any catalyst diagnosis.
The causes are those at P2195 with one addition specific to being underneath the car: this sensor and its harness live in the road spray, so wiring and connector faults account for a larger share here than they do upstream.
Causas prováveis
Comece aqui
- Sensor de oxigênio defeituoso · moderado
- Chicote elétrico danificado · moderado
- Vazamento no escapamento antes do sensor · moderado
Menos comum
- Elemento da sonda lambda contaminado · moderado
- Conector corroído ou frouxo · fácil
- Aquecedor da sonda lambda com defeito · moderado
Sintomas
Componentes envolvidos
Informação, não instrução
O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.
Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.
Experiência da comunidade
Seja o primeiro a documentar isto
Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.
O que faz valer a leitura:
- O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
- O que você mediu, não só o que trocou.
- O que realmente resolveu — ou que nada resolveu, o que também vale saber.
Entrar ou criar uma conta para adicionar o que você descobriu sobre P2270.