Pular para o conteúdo

U0333 Alta Genérico / SAE

U0333: Incompatibilidade de software com o módulo B de controle da troca de marcha

WhatsApp Telegram X E-mail

O que fazer

Use the parking brake firmly every time you stop, and do not rely on the gear display. Everything at U0304 applies here.

Nothing is broken. Two of your car's computers are running software that does not belong together, and one of them is involved in reading which gear you have asked for.

There is a useful check worth doing before the car goes anywhere. If your car has two ways of changing gear — a lever and paddles, for instance — try both. If one works and the other does not, say so: it tells the garage immediately which half is on the wrong software, and that is much more useful than "it will not select a gear".

The safety point does not change. The car may refuse to come out of park, refuse to go into park, or show a gear it is not actually in. If the car rolls at all when you take your foot off the brake, it is not in park regardless of what the display says — so use the parking brake and avoid slopes.

Mention any module replaced, especially a second-hand one, and any gearbox work. What each lever position means is defined in software, and it changes quietly between model years while the plug and part number stay identical.

O que este código significa

A second gear shift control module is running software that does not belong with its partners'. Everything at U0304 applies unchanged, including the instruction that follows from it: apply the parking brake deliberately every time, and do not trust the gear display.

What a second selector module means is the useful addition.

Some vehicles split the job: a module in the selector itself reading the lever or rotary control, and a second in the transmission or the console interpreting it and arbitrating with the gearbox. Others genuinely have two controls — a lever and steering wheel paddles, or a console selector and a secondary control for a specialist body — and each has its module.

Where two controls exist, a mismatch produces a disagreement worth recognising: the two ways of selecting a gear no longer behave the same. Paddles that work while the lever does not, or a manual gate that behaves differently from the paddles, is that — and it is much more informative than a general "it will not select", because it tells you which half of the pair is on the wrong software.

So try both controls before the vehicle goes anywhere, and report the difference.

And the safety framing from U0304 does not soften for a secondary control. The vehicle may refuse to leave park, refuse to select park, or display a gear it is not in — and the last is the one a driver acts on. If the vehicle rolls when the brake pedal is released, it is not in park whatever the dashboard says.

Causas prováveis

Comece aqui

Menos comum

Sintomas

Componentes envolvidos

Informação, não instrução

O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.

Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.

Experiência da comunidade

Seja o primeiro a documentar isto

Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.

O que faz valer a leitura:

  • O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
  • O que você mediu, não só o que trocou.
  • O que realmente resolveu — ou que nada resolveu, o que também vale saber.

Entrar ou criar uma conta para adicionar o que você descobriu sobre U0333.