P015C: Lambdasonde — Verzögerte Reaktion von fett nach mager, Bank 2 Sensor 1
Was zu tun ist
Ask whether the same fault is stored on the other bank. Both banks together means the fuelling itself is at fault rather than the sensors, and replacing two sensors will not fix it.
If any oxygen sensor work has been done recently, ask for the connectors to be confirmed as going to the right banks. The two sides often use identical plugs, and crossing them makes each bank trim from the other's sensor — which produces strange readings and is corrected in minutes once spotted.
Ask for an exhaust leak check on this bank, which is a common cause and often audible when cold.
Expect worse fuel economy while it is unrepaired, since this sensor controls the mixture rather than just monitoring it.
Was dieser Code bedeutet
The upstream oxygen sensor on bank 2 is not beginning its rich-to-lean transition when it should.
This is an upstream sensor on the second bank, so it controls fuelling for that bank alone — and on most V engines the two banks are trimmed independently. That independence is what makes a comparison between them so useful.
Bank 2 running late while bank 1 responds correctly is a bank-specific fault, and the list is short: this sensor, an exhaust leak on this side, or the wiring to it.
Both banks late together is not a sensor problem at all. It means the mixture really is arriving late relative to what the module commanded — a fuel pressure problem, a purge valve, or a fuelling strategy fault — and both sensors are reporting honestly.
One trap belongs specifically to upstream sensors on a V engine, and it is worth naming because the symptom is bizarre. The two banks' sensor connectors are often identical and within reach of each other, and when they are crossed, each bank is trimmed from the other bank's sensor. The result is a pair of banks chasing each other's mixture, with fuel trims running to opposite extremes and codes that make no sense individually.
After any work involving both sensors, confirm each connector goes to its own bank before diagnosing anything else.
Wahrscheinliche Ursachen
Hier anfangen
- Alternde oder träge Lambdasonde · mittel
- Abgasleck stromaufwärts der Sonde · mittel
Seltener
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu P015C.