P06BC: Glühkerze von Zylinder 4 — Stromkreis, Bereich/Funktion
Was zu tun ist
Ask for a voltage drop test on the glow plug supply rather than just a continuity check. They are not the same — a circuit can show perfect continuity and still lose too much voltage once the plugs actually draw current, and this is the last plug on the supply run, so it feels that loss most.
Ask for all four plugs to be done if any are coming out. Same labour, same risk of a plug snapping in the head, and they are the same age.
Expect hard starting and white smoke on cold mornings until it is repaired.
Mention whether the plugs have been replaced before, and whether they were original parts.
Was dieser Code bedeutet
Cylinder 4's glow plug circuit is electrically valid but not behaving correctly.
On a four-cylinder diesel this is the last plug in the row, and that position carries a specific and frequently missed cause.
Glow plugs are fed by a supply strap or harness that runs the length of the head, branching to each plug in turn. Every connection along that run is in series with the last plug on it — so cylinder 4 accumulates the voltage drop of the whole chain. A little corrosion at each of three earlier terminals is invisible individually and adds up here.
Which is why a voltage drop test along the supply, taken while the plugs are actually drawing current, is the measurement that matters. A continuity check confirms a path exists and says nothing about how much voltage that path loses under a heavy glow plug load.
This is the same failure as a corroded battery terminal that cranks fine until a cold morning. The circuit works until it is asked to carry real current — which, for a glow plug, is exactly when it matters.
Where the supply is sound, the plug itself is the honest answer. It is at the end of the row, it has heat-cycled as many times as the others, and it is due.
Do the set if any come out. The labour and the snapping risk are the same for one as for four.
Wahrscheinliche Ursachen
Hier anfangen
- Hoher Widerstand in der Sensorleitung · mittel
- Glühkerze ausgefallen · mittel
- Korrodierter oder loser Stecker · einfach
Seltener
- Versorgungsleitung der Glühkerze gebrochen · mittel
- Falsche Glühkerzen eingebaut · mittel
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu P06BC.