P2199: Korrelation zwischen Ansauglufttemperatursensor 1 und 2
Was zu tun ist
The car will usually drive, perhaps with slightly reduced performance on a turbocharged engine because the module protects itself against an intake temperature it thinks is too high. If this only ever appears on the first start of the day, that is expected — the comparison is only valid after the car has stood overnight, so a fault cleared in the afternoon will look fixed until the next morning. Ask for both sensors to be compared against the coolant and outside temperature readings after a long stand; whichever disagrees with the other three is the one to replace, and that check costs nothing.
Was dieser Code bedeutet
Two intake air temperature sensors disagree by more than the module will accept.
Why an engine has two, and where they sit. One is normally in the air intake ahead of everything, often built into the mass airflow sensor; the other is downstream, in the intake manifold or after the intercooler. As with the paired coolant sensors at P2182, the difference between them is the useful quantity: on a turbocharged engine it measures how much heat the intercooler is actually removing, which is information no single sensor can provide. Compression heats intake air substantially, and dense cool air is the entire point of an intercooler, so the module wants to know whether it is working.
The check runs at cold soak, and that detail explains the symptom pattern. A running engine legitimately produces different readings at the two points, so no comparison is possible then. What is reliable is a vehicle that has stood long enough for everything under the bonnet to settle to ambient — overnight, typically. At that moment every temperature sensor on the engine should read the same, and any that does not has drifted. So this code is set on the first start of the day and effectively never at any other time, which is why clearing it appears to fix it and why the fault seems to return by itself the following morning. That is not intermittent behaviour; it is the test only getting one chance a day.
It also means a drifted sensor is caught while the engine is cold, which is precisely when it does the most harm. Intake air temperature is an input to fuelling and to ignition timing, and on a turbocharged engine to boost limits — a sensor reading twenty degrees warm makes the module retard timing and reduce boost to protect against detonation that is not occurring, which costs real power for no reason.
The correlation code names a relationship rather than a part, as every correlation code does. Which of the two has drifted is settled by comparing both against the coolant temperature and the ambient sensor after a long stand — the odd one out is the faulty one, and that comparison requires no test equipment beyond the live data the workshop already has on screen.
Wahrscheinliche Ursachen
Hier anfangen
- Ansauglufttemperatursensor defekt · einfach
- Verschmutzter oder defekter Luftmassenmesser · einfach
Seltener
- Korrodierter oder loser Stecker · einfach
- Kabelbaum beschädigt · mittel
- Ladeluftkühler verstopft oder defekt · mittel
Selten
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu P2199.