P2A42: Drucksensor von Tank B für alternativen Kraftstoff — Bereich/Funktion
Was zu tun ist
The car will run on petrol, or on gas with worse economy. A gas system running lean can damage valve seats over time, so this is worth fixing rather than tuning around. Use an installer who works on these systems.
Was dieser Code bedeutet
The circuit for the pressure sensor on gaseous fuel tank B is faulty.
Tank pressure on a gas system is not a fuel-level reading, and confusing the two is the mistake this family invites.
LPG in a tank is a liquid with vapour above it, and the pressure of that vapour is set almost entirely by temperature rather than by how much is left. A tank that is nearly empty and one that is nearly full read close to the same pressure at the same temperature — and the same tank reads perhaps 4 bar on a winter morning and 10 bar after a summer afternoon parked in the sun.
So the module needs this reading for two quite different jobs. It is how the system knows what pressure the gas will arrive at, which changes how long the injectors must be held open for a given quantity of fuel. And it is how the system detects a leak — a tank whose pressure falls when the temperature has not is losing its contents.
Level is measured separately (P2A5F), which is why both exist.
A pressure sensor that reads wrong therefore mis-fuels the engine rather than mis-reporting the gauge. Reading high, the module under-delivers and the engine runs lean, which on gas means high combustion temperatures and, over time, damaged valve seats. That is the expensive failure mode of a cheap sensor, and it is why a lean-running gas conversion is worth taking seriously rather than tuning around.
Present and plausible but disagreeing with what the system expects — the variant that catches a sensor drifting rather than failing, which is the one that quietly mis-fuels the engine.
Wahrscheinliche Ursachen
Hier anfangen
- Tankdrucksensor defekt · Fachwerkstatt
- Korrodierter oder loser Stecker · Fachwerkstatt
Seltener
- Leitungsbruch in der Sensorleitung · Fachwerkstatt
- Kabelbaum beschädigt · Fachwerkstatt
- Referenzspannungsversorgung des Sensors ausgefallen · Fachwerkstatt
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu P2A42.