U010C: Kommunikationsverlust mit dem Steuergerät A des Turboladers
Was zu tun ist
Expect reduced power, and possibly limp mode. The engine is protecting itself: without confirmed control of the turbocharger it will not risk boost, so what you have is a deliberately weakened engine rather than a damaged one. It is drivable, gently, to somewhere it can be looked at.
Ask for the wiring, the connector and the module's supply to be checked before the actuator or the turbocharger is quoted for. On most engines the part this code names sits on the turbocharger itself — the hottest place under the bonnet — and its connector and wiring fail far more often than the electronics inside it. The part is expensive and is sometimes only sold with the turbocharger attached.
If it is replaced, ask whether it has been calibrated to this turbocharger. A new actuator that has not learned its own limits reports meaningless positions, and the fault looks like it survived the repair.
Was dieser Code bedeutet
The module controlling boost has stopped being heard from on the data network. What a lost communication code does and does not mean is at U0100 and applies here unchanged.
The surprise in this code is that many vehicles carrying it have no separate boost computer at all, and it still applies to them. The turbocharger's vane actuator on most modern diesels is itself a module — a small sealed unit with its own processor, addressed over a LIN or CAN line, which receives a target position as a message and reports back where it actually is. It is not a motor taking a voltage. That is why losing the conversation with it produces a communication code rather than a circuit code.
An electric supercharger or an electrically assisted turbocharger is the other case, and there the module is a genuinely substantial one, running a motor on the 48 volt system.
What the engine does next is the safe thing, and it is why this reads as a serious fault from the driver's seat. With no confirmed control of boost, the module has no way to prevent an overboost, so it commands the fail-safe position and limits torque: reduced power, no meaningful boost, and usually limp mode.
The diagnostic point is the one this corpus makes about every module a code names. The actuator is expensive, frequently sold only as part of the turbocharger, and is usually innocent — its supply, its earth, its connector and the single wire carrying the conversation account for most of these. The connector's position is against the argument for the actuator too: it lives on the turbocharger, which is the hottest thing on the engine, and heat is what ages a connector.
If the actuator genuinely is replaced, it must be calibrated to the turbocharger it is fitted to. A new one that has not learned its own end stops reports positions that mean nothing, and the fault appears to persist through the repair.
Wahrscheinliche Ursachen
Hier anfangen
- Korrodierter oder loser Stecker · einfach
- Datenbusleitungen beschädigt · mittel
- Versorgung oder Masse des Steuergeräts ausgefallen · mittel
Seltener
- Kabelbaum beschädigt · mittel
- Steller nach Reparatur nicht kalibriert · Fachwerkstatt
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu U010C.