U0225: Kommunikationsverlust mit dem Fensterhebermotor D
Was zu tun ist
The car drives normally. Check the rear window lockout switch first if this is a rear window — see U0224.
One thing worth knowing, because it looks far worse than it is: if closing all the windows from the key fob has stopped working, that can be caused by a single faulty window. The car will not close windows unattended unless it is sure the trap protection works on all of them, so one motor out of action disables the feature for the whole vehicle. It usually returns as soon as that one window is sorted.
And count how many windows misbehave. All four at once is almost always a power-loss issue needing re-initialisation, not four failures — see U0222 for the procedure, which costs nothing to try.
Was dieser Code bedeutet
The fourth door window motor has stopped being heard from. See U0222 for the family's framing and U0224 for the rear window lockout, which should be eliminated first.
On a four-window car this completes the set, so the counting test applies: how many windows are affected decides where the fault is. All four losing one-touch together is a power-loss and re-initialisation story, not four failed motors. One window alone is a fault in that door.
What is worth adding at the end of the series is the global-close feature, because it produces a complaint that sounds like a fault and is not. Many vehicles will close every window at once from the key fob or by holding the lock button, and that convenience function is normally disabled the moment any window motor loses its learned position or its network address — because the vehicle will not close windows unsupervised when it cannot guarantee anti-trap protection on all of them.
So one faulty window motor can stop every window closing from the key, which reads as a much bigger electrical problem than it is. Recognising that a global-close failure can have a single-window cause saves a great deal of unnecessary investigation, and it usually comes back the moment the one affected window is re-initialised or repaired.
Wahrscheinliche Ursachen
Hier anfangen
Seltener
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu U0225.