U0554: Ungültige Daten vom Schnittstellenmodul für das Zubehörprotokoll empfangen
Was zu tun ist
The car drives normally. Before anybody charges you for this one, do the free test.
Unplug everything — phone cables, chargers, USB sticks, dash cameras, any adapter in the accessory socket — and see whether the fault comes back over the next few days. This module is the car's translator for things you plug in, so the commonest cause is something plugged in. Cheap chargers are the usual culprits: they inject electrical noise the car was never designed to hear.
If the car's battery goes flat when it stands for a few days, mention that specifically. A device that keeps this interface awake stops the whole car going to sleep, and that is the version of this fault that costs money.
If it persists with nothing connected, then it is worth looking at properly — and any recent software update is worth mentioning.
Was dieser Code bedeutet
The accessory protocol interface module is broadcasting data that cannot be accepted as true. See U0400 for what an invalid-data code is and why the module it names is usually the messenger rather than the culprit.
This module is a translator, and knowing that changes where you look.
It sits between the vehicle's own network and whatever has been plugged into it — phone projection, USB and media devices, aftermarket accessories, and the connectors a manufacturer provides for dealer-fitted options. Its job is to keep the outside world from speaking directly to the car's bus.
Which makes it, by design, the module most exposed to things the manufacturer never tested. A cheap charger that injects electrical noise, a phone cable with poor screening, an accessory drawing more than the port expects, or a device that keeps talking after the car is locked — all of them reach the vehicle through here.
So the first diagnostic step costs nothing: unplug everything. Remove every accessory, cable, charger and adapter, clear the code, and see whether it comes back. A fault that disappears when the car is empty has been diagnosed, and no part needs replacing.
The second is the sleep question. A device that holds this interface awake stops the vehicle shutting down, and the owner meets that as a flat battery after a few days rather than as a fault.
Wahrscheinliche Ursachen
Hier anfangen
- Fremdradio anstelle des Originalgeräts eingebaut · mittel
- Steuergerät nicht auf das Fahrzeug codiert · Fachwerkstatt
- Korrodierter oder loser Stecker · einfach
- Schlechte Leitungsverbindung in einem nachträglichen Einbau · mittel
Seltener
- Software nur an einem Steuergerät aktualisiert · Fachwerkstatt
- Datenbusleitungen beschädigt · mittel
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu U0554.