Aller au contenu

U0081 Modérée Générique / SAE

U0081: Bus de communication du véhicule F — performance

WhatsApp Telegram X E-mail

Que faire

Everything may still work, and this is worth attending to now — see U0011 for why an error rate is an early warning rather than a nuisance.

But on a converted or commercial vehicle there is a particular explanation worth knowing, because it means the wiring may be undamaged and still be the problem.

A vehicle's network is a carefully shaped line, and equipment connected to it on a long cable makes the signal bounce back and interfere with itself. That corrupts messages when the network is busy, while every ordinary test looks perfect.

And a converted vehicle is exactly where long cables come from. Body equipment gets mounted where the body needs it — a tail-lift at the back, a crane in the middle, a tipper valve under the bed — and the cable to each is as long as the vehicle requires.

So this may not be a fault to find. It may be a layout to change — and that is the converter's job rather than a general workshop's. They can fit a repeater, split the network, or relocate a connection so the tail is short.

Mention it in those terms when you call them, because a garage looking for a bad connection may be looking for something that is not there.

Ce que signifie ce code

Vehicle communication bus F is working, and not working properly. See U0011 for what a performance code means and U0080 for why this network is probably a converter's rather than the manufacturer's.

Those combine into the clearest case of U0037's argument in the whole range.

U0037 explains that a network is a shaped transmission line, and that a device connected on a long tail reflects signals back down it — corrupting messages under traffic while leaving every static measurement correct.

A converted vehicle is where long tails come from. Body equipment is mounted where the body needs it, not where the wiring would prefer — a tail-lift controller at the rear, a crane at the centre, a tipper valve block under the bed — and the cable to each of them is as long as the vehicle requires.

So a performance code on a converted vehicle should be read as a question about layout rather than damage. The wiring may be undamaged, correctly made and entirely at fault, because of how far it has to reach.

Which is a real problem with a real answer, and it belongs to the converter: a repeater, a separate network segment, or moving a node so its tail is short. It is not something a general workshop can fix by finding a bad connection, because there may not be one.

Causes probables

Commencez ici

Moins fréquent

Symptômes

Composants concernés

Des informations, pas des instructions

CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.

Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.

Expérience de la communauté

Soyez le premier à en faire le compte rendu

Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.

Ce qui rend un compte rendu utile :

  • La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
  • Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
  • Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.

Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de U0081.