U0220: Perte de communication avec le contacteur F de porte
Que faire
The vehicle drives normally. A door beyond the usual four has stopped reporting whether it is open.
The consequence to watch for is a flat battery, especially if the vehicle stands over a weekend. A vehicle that thinks a door is open never fully powers down and drains itself in a few days — see U0215. On a van that stands from Friday to Monday, this is a very ordinary reason for a Monday morning no-start, and it usually gets blamed on the battery.
If the door in question is one that gets held open for long periods, mention it — that is far harder on a switch than anything a car sees.
And if the vehicle is a conversion, the switch may have been fitted by the converter rather than the manufacturer, so their wiring and documentation are the place to start.
Ce que signifie ce code
The sixth door switch has stopped being heard from. See U0215 for the family's framing and U0219 for what a switch beyond the usual four normally turns out to be.
Six door switches places the vehicle among vans, minibuses and larger bodies, and the commercial-vehicle reasoning at U0204 applies here too: the fault is disproportionately likely to be damage or a previous installation rather than an aged component.
One thing is specific to switches rather than modules and is worth naming: on a working vehicle, doors are held open for long periods. A delivery van's side door may stand open for hours a day. That is a duty cycle no passenger car door switch ever sees, and it matters in two ways — the switch contacts spend far more of their life in the actuated state, and the vehicle spends far more of its life being told a door is open, which interacts badly with the sleep behaviour at U0215.
A commercial vehicle with a flat battery every Monday morning and a door switch code is a very ordinary picture, and one worth recognising because the usual conclusion is a tired battery on a vehicle that stands over weekends.
On converted vehicles, the switch may also have been added or relocated by the converter rather than fitted at the factory, so its wiring is an aftermarket installation with all that implies.
Causes probables
Commencez ici
- Connecteur corrodé ou mal enclenché · facile
- Faisceau de câblage endommagé · modérée
- Infiltration d'eau dans le connecteur du calculateur · modérée
Moins fréquent
- Fil rompu dans le passe-câble de porte · modérée
- Calculateur non codé au véhicule · spécialisée
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de U0220.