U0588: Données non valides reçues du module A de pompe à huile de boîte
Que faire
The car drives normally. The most likely sign is that stop-start has quietly stopped switching the engine off at junctions.
That is deliberate rather than broken. The car will not stop the engine when it cannot be sure of holding transmission pressure through the stop — so what you are seeing is a protection, not a failure.
Worth repairing rather than living with, particularly on a hybrid, where the same pump covers every engine-off moment and a shunt at each restart is wear the clutches were not designed for.
If gear changes have also become harsh, or there is a pause before the car moves off, say so — that moves the diagnosis from the electrical side to the hydraulic one, and there are separate codes covering that.
Ce que signifie ce code
Transmission fluid pump module A is broadcasting data that cannot be accepted as true. See U0400 for what an invalid-data code is and why the module it names is usually the messenger rather than the culprit.
This is the electric auxiliary transmission fluid pump, and the corpus already documents its faults in depth in the P27xx range — this code is the network's view of the same part.
The pump exists for the moments the engine is off. A conventional automatic makes its hydraulic pressure from an engine-driven pump, so at a stop-start red light the pressure would fade and the first metre of drive would arrive with a thump. The electric pump holds pressure through those stops, and hybrids lean on it whenever the engine sleeps.
What this code adds to the P27xx family is the direction of the fault. A pressure or control code at P2796 onward describes the pump misbehaving; this describes the pump's module publishing data the network will not accept, which points more at the reporting path than the hydraulics — connectors, the module's own supply, or a software mismatch after work.
The symptom is the same either way, and it is a quiet one: stop-start giving up. The module will not permit an engine stop it cannot cover, so a car that used to switch off at the lights and no longer does, with this stored, has already explained itself.
See P27E1 and P2796 for the hydraulic side, which is where the mechanical diagnosis belongs.
Causes probables
Commencez ici
- Connecteur corrodé ou mal enclenché · spécialisée
- Câblage du bus de données endommagé · modérée
Moins fréquent
- Infiltration d'eau dans le calculateur · modérée
- Logiciel mis à jour sur un seul calculateur · spécialisée
- Alimentation ou masse du calculateur hors service · spécialisée
- Huile de boîte insuffisante ou dégradée · modérée
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de U0588.