P219B: Banco 2 — desequilíbrio da relação ar/combustível
O que fazer
Ask whether the same fault is stored for the other bank. If both banks are affected, the cause is something shared — fuel pressure, fuel quality, or an airflow sensor — not a set of bad injectors, and that is a completely different repair.
Ask for the bank to be confirmed against the manufacturer's diagram before any part is replaced. Bank 2 is not always the side you would expect.
Ask about an intake leak as well as the injectors. A leaking gasket at a single intake runner leans one cylinder, which is exactly what this detects, and it is a much cheaper repair.
Mention any rough idle, however slight, since idle is where an imbalance shows first.
O que este código significa
The cylinders on bank 2 are not receiving the same air-fuel ratio as each other.
The mechanism is bank 1's — the module resolves individual cylinder signatures in the wideband oxygen sensor signal and finds them unequal. What a bank 2 code adds is the comparison, and on a V engine that comparison is genuinely decisive.
- One bank imbalanced, the other even — the cause is local to this bank. Its injectors, its intake runners, its own fuel supply if the banks are fed separately.
- Both banks imbalanced — look for something shared. A failing airflow sensor, fuel pressure, or fuel quality affect every cylinder, and the module reports it as imbalance on both sides.
That second case is worth stating plainly because it changes the repair completely. Both banks imbalanced is not eight bad injectors — it is one thing upstream of all of them.
Bank identification is the usual trap. Bank 1 is the bank containing cylinder 1, which is not always the side nearest the front and differs between manufacturers. Confirm against the manufacturer's diagram before working on anything.
An intake leak deserves specific mention on a V engine. The two banks share a plenum on most designs, but each runner is its own path — so a leaking gasket at one runner leans that cylinder alone, which is exactly what this code detects and what no fuel trim would reveal.
Causas prováveis
Comece aqui
- Vazamento de vácuo no coletor de admissão ou nas mangueiras · moderado
- Injetores de combustível desgastados ou vazando · especializado
- Junta do coletor de admissão vazando · moderado
Menos comum
- Bico do injetor obstruído ou restrito · especializado
- Sensor de fluxo de ar com defeito · fácil
Sintomas
Componentes envolvidos
Informação, não instrução
O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.
Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.
Experiência da comunidade
Seja o primeiro a documentar isto
Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.
O que faz valer a leitura:
- O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
- O que você mediu, não só o que trocou.
- O que realmente resolveu — ou que nada resolveu, o que também vale saber.
Entrar ou criar uma conta para adicionar o que você descobriu sobre P219B.