P2590: Sensor B de posição do controle de sobrealimentação do turbocompressor — circuito intermitente/errático
O que fazer
The car will mostly feel normal, with occasional flat spots or a warning light that comes and goes.
Note when it happens and say so — a fault that appears after a long climb or a sustained fast run and clears once the engine has cooled points at heat affecting a connector or the wiring, which is a much smaller job than anything involving a turbocharger.
Worth acting on rather than waiting for it to become permanent. This is often the early stage of carbon stiffening the vane mechanism, and a mechanism that is still stiff rather than seized can often be freed off instead of replaced. On a car with two turbochargers it is also the moment to have both checked — they have done the same miles, and doing both at once is one job rather than two.
O que este código significa
The second turbocharger's vane position signal drops out or jumps rather than moving smoothly, and recovers.
The physical explanation is the one given at P2566: the sensor is bolted to something that gets extremely hot and then cools, over and over. Connectors that are merely tight rather than latched work loose as metal expands and contracts, and hardened insulation opens a crack when hot that closes as it cools. So the fault is often present only after the engine has worked hard, and absent by the time the car reaches a workshop — which makes the driver's account of when it happens more useful than anything a stationary test will show.
The other genuine cause is mechanical: vanes that are stiff rather than seized move raggedly, so the signal is honest and the movement itself is erratic. That is the early stage of the carbon problem described at P2563, and it is much cheaper to catch here than later.
On a twin-turbo engine, an intermittent code on one side is a reason to look at both. Both mechanisms have accumulated carbon on the same journeys, and the one that is merely stiff today is the one that seizes next. It is the point at which freeing both off is a single job rather than two.
Causas prováveis
Comece aqui
- Falha intermitente na fiação · moderado
- Conector corroído ou frouxo · fácil
- Dano térmico ao sensor ou à fiação · moderado
Menos comum
- Carvão travando as palhetas do turbocompressor · especializado
- Sensor de posição das palhetas do turbo com defeito · moderado
Sintomas
Componentes envolvidos
Informação, não instrução
O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.
Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.
Experiência da comunidade
Seja o primeiro a documentar isto
Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.
O que faz valer a leitura:
- O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
- O que você mediu, não só o que trocou.
- O que realmente resolveu — ou que nada resolveu, o que também vale saber.
Entrar ou criar uma conta para adicionar o que você descobriu sobre P2590.