Pular para o conteúdo

U0020 Moderada Genérico / SAE

U0020: Barramento de comunicação CAN de baixa velocidade — desempenho

WhatsApp Telegram X E-mail

O que fazer

Everything probably works, and there will be no symptom until it stops. That combination makes this the quietest fault in this whole range.

Two things are happening at once. The network is correcting errors rather than simply carrying messages — which it is good enough at to hide completely. And this particular network is designed to keep running on one wire if the other fails, which hides the rest.

So "nothing seems wrong with it" is not evidence, and neither is a clear test drive.

There is a specific and reasonable thing to ask a garage for, and it turns this from an opinion into a measurement: ask them to read the network's error counters, and whether it is running in single-wire mode. A proper diagnostic tool reports both; a basic code reader shows neither.

If it is running on one wire, the reserve has already been spent and the next fault is the one that stops things — so the cheap moment to fix it is now.

Mention damp carpets, water in the boot, and anything fitted to the car after it was built — a tracker, dashcam, alarm or stereo, all of which can load a network they were never designed into.

O que este código significa

The low speed data bus is working, and not working properly. See U0011 for what a performance code means — an error rate rather than a failure — and U0019 for why this particular network hides its faults.

Those two arguments compound here, and that is worth stating plainly because it makes this the quietest serious code in the range.

A performance code means the bus is spending part of its time correcting itself rather than carrying traffic. And a fault-tolerant low speed network is already designed to carry on through damage. So a vehicle can be running on one wire, correcting errors on it, and presenting a driver with absolutely nothing to notice.

There is no symptom to judge by, and there will not be one until it stops.

Which makes the measurement the only honest guide, and it needs the manufacturer's figures rather than the familiar 60 ohms — see U0019. What a technician should be asking for is the network's error counters and whether it is running in single-wire mode, both of which a proper scan tool reports and neither of which a code reader shows.

That is a specific and reasonable thing to ask for, and it turns "nothing seems wrong" into a measured answer.

Causes are the marginal ones from U0011: a connector corroding but still conducting, a conductor down to a few strands, damp in a joint, or an added device loading a network it was never designed into.

Causas prováveis

Comece aqui

Menos comum

Sintomas

Componentes envolvidos

Informação, não instrução

O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.

Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.

Experiência da comunidade

Seja o primeiro a documentar isto

Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.

O que faz valer a leitura:

  • O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
  • O que você mediu, não só o que trocou.
  • O que realmente resolveu — ou que nada resolveu, o que também vale saber.

Entrar ou criar uma conta para adicionar o que você descobriu sobre U0020.