Zum Inhalt springen

U0020 Mittel Generisch / SAE

U0020: CAN-Kommunikationsbus Low-Speed — Funktion

WhatsApp Telegram X E-Mail

Was zu tun ist

Everything probably works, and there will be no symptom until it stops. That combination makes this the quietest fault in this whole range.

Two things are happening at once. The network is correcting errors rather than simply carrying messages — which it is good enough at to hide completely. And this particular network is designed to keep running on one wire if the other fails, which hides the rest.

So "nothing seems wrong with it" is not evidence, and neither is a clear test drive.

There is a specific and reasonable thing to ask a garage for, and it turns this from an opinion into a measurement: ask them to read the network's error counters, and whether it is running in single-wire mode. A proper diagnostic tool reports both; a basic code reader shows neither.

If it is running on one wire, the reserve has already been spent and the next fault is the one that stops things — so the cheap moment to fix it is now.

Mention damp carpets, water in the boot, and anything fitted to the car after it was built — a tracker, dashcam, alarm or stereo, all of which can load a network they were never designed into.

Was dieser Code bedeutet

The low speed data bus is working, and not working properly. See U0011 for what a performance code means — an error rate rather than a failure — and U0019 for why this particular network hides its faults.

Those two arguments compound here, and that is worth stating plainly because it makes this the quietest serious code in the range.

A performance code means the bus is spending part of its time correcting itself rather than carrying traffic. And a fault-tolerant low speed network is already designed to carry on through damage. So a vehicle can be running on one wire, correcting errors on it, and presenting a driver with absolutely nothing to notice.

There is no symptom to judge by, and there will not be one until it stops.

Which makes the measurement the only honest guide, and it needs the manufacturer's figures rather than the familiar 60 ohms — see U0019. What a technician should be asking for is the network's error counters and whether it is running in single-wire mode, both of which a proper scan tool reports and neither of which a code reader shows.

That is a specific and reasonable thing to ask for, and it turns "nothing seems wrong" into a measured answer.

Causes are the marginal ones from U0011: a connector corroding but still conducting, a conductor down to a few strands, damp in a joint, or an added device loading a network it was never designed into.

Wahrscheinliche Ursachen

Hier anfangen

Seltener

Symptome

Beteiligte Bauteile

Information, keine Handlungsanweisung

CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.

Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.

Erfahrungen der Community

Schreiben Sie den ersten Erfahrungsbericht dazu

Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.

Was einen Bericht lesenswert macht:

  • Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
  • Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
  • Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.

Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu U0020.