P203B: AdBlue-Füllstandsensor A — Stromkreis, Bereich/Funktion
Was zu tun ist
Look under the vehicle around the reductant tank and lines for white crystalline deposits. Reductant fluid dries to a distinctive white crust, and finding it means a leak rather than a sensor fault — which is worth telling the garage before they start.
Say roughly how often you top the tank up and whether that has changed. If consumption has gone up, the fluid is going somewhere; if the level never seems to drop, it may not be dosing at all. Either points away from the sensor.
Mention whether the gauge or the range display behaves oddly — jumping, or not moving for a long time then dropping suddenly.
Do not ignore it. The system uses this reading to check itself, so several other faults follow from it, and the emissions inducement sequence eventually limits the vehicle.
Was dieser Code bedeutet
The reductant level sensor is reporting a value that is electrically valid but not credible.
Level in a reductant tank is measured more carefully than fuel level, and for a reason that shapes this whole diagnosis. The module does not merely display it — it compares the level falling against the dose it commanded. That comparison is how the system detects a leak, a blocked injector, or a tampering device, so a level sensor that lies breaks several other checks at once.
Range/performance means the reading is present and wrong. The classic evidence:
- A level that does not fall while the system is demonstrably dosing.
- A level that jumps rather than moves smoothly, which a float cannot physically do.
- A level that rises without anyone filling the tank.
Many of these sensors are combined units measuring level, temperature and often quality in one assembly, which means a fault reported as level can be an assembly fault — and it is worth checking whether temperature and quality readings from the same unit are also implausible.
Before condemning it, consider that the reading may be honest. A tank that genuinely is not emptying points at an injector not dosing, and a level that falls faster than commanded points at a leak — which leaves visible white crystalline deposits under the vehicle.
Look underneath for those deposits. They are unmistakable and they change the diagnosis completely.
Wahrscheinliche Ursachen
Hier anfangen
- AdBlue-Füllstandsensor defekt · mittel
- Schwimmer des Sensors hängt · mittel
- Korrodierter oder loser Stecker · einfach
Seltener
- AdBlue-Leckage aus Tank oder Leitungen · mittel
- Auskristallisierte AdBlue-Ablagerungen · mittel
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu P203B.