P0DAA: Défaut d'isolement du système de charge
Que faire
Do not charge the car until it has been inspected, and treat this as urgent even though the car will probably drive normally. Isolation is what makes a high-voltage system safe to be near, and this says it has been compromised. If it appears in wet weather and disappears later, it has not fixed itself — report it anyway.
Ce que signifie ce code
The charging system has lost electrical isolation from the vehicle's chassis.
Isolation is the single design decision that makes a high-voltage car safe to touch, and this code says it has failed. A traction system is deliberately floating: neither of its poles is connected to the bodyshell, so touching one pole and the car does not complete a circuit through you. A 12-volt system does the opposite — it earths its negative to the body and returns current through the metal — which is exactly why the two cannot be reasoned about the same way. The argument is set out at P0D0E, and the monitoring that polices it at P0AA6.
What makes this code distinct is that it names the charging system. So the leak is somewhere in the path that only exists while the car is plugged in — the inlet, the charger, the charging contactors and their cabling — rather than in the pack or the drive system. That is a genuinely useful narrowing, and it comes with a most-likely cause attached: the charge inlet is the one high-voltage assembly on the car that is open to the weather and handled by hand, so water, salt and a cracked seal account for a large share of these.
Isolation faults are frequently intermittent and weather-dependent, appearing on wet mornings and clearing by afternoon, which is why one that clears itself must not be treated as one that fixed itself. A single isolation fault is not yet dangerous — that is the whole point of a floating system, since it takes two faults to make a path through a person. It is the loss of the safety margin, and the second fault is the one nobody sees coming.
Causes probables
Commencez ici
- Infiltration d'eau dans le connecteur · spécialisée
- Prise de charge ou broches endommagées · modérée
- Isolation de câble haute tension endommagée · spécialisée
Moins fréquent
- Composants haute tension endommagés par un accident · spécialisée
- Chargeur embarqué défectueux · spécialisée
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de P0DAA.