P2201: Capteur de NOx — circuit, plage/performance, banc 1 capteur 1
Que faire
Do not let this be treated as a failed sensor until the system it watches has been checked. This code fires when NOx output is too high, and a sensor accurately reporting a genuine problem looks identical to one that has drifted. Have the reductant level and quality, the dosing system and the EGR checked first — an empty or wrongly filled tank, crystallised deposits or a stuck EGR valve all produce this, and all of them will produce it again with a new sensor fitted. The inducement countdown described under P2200 applies, so this does need dealing with rather than deferring.
Ce que signifie ce code
The NOx sensor is working and reporting a figure the module does not accept. Before anything else: this code very often means the sensor is right.
That distinction is the whole of this page. A range/performance code says a reading is implausible — but "implausible" is judged against what the module expects when the aftertreatment is functioning. A sensor accurately reporting that far too much NOx is leaving the vehicle produces exactly the same code as a sensor that has drifted. One of those is a messenger and the other is the fault, and they are not distinguished by the code.
So the question to ask first is not whether the sensor is good, but whether there is anything for it to measure correctly. The reduction system it watches can fail in several ordinary ways, all of which make NOx output genuinely high:
- No reductant, or the wrong fluid. An empty tank, or something other than the correct urea solution put into it, and there is nothing to react with.
- Crystallised deposits blocking the injector or coating the catalyst, which is the characteristic failure of these systems and is covered at P2037 and P2047.
- A dosing fault — the injector not delivering, covered at P2047.
- A catalyst below working temperature, which is normal on short journeys and abnormal if it persists.
- An EGR fault, since recirculation is the other half of NOx control and a valve stuck closed raises combustion temperature and NOx output together.
Every one of those is a real fault that a new NOx sensor will report just as faithfully as the old one did. Fitting an expensive sensor because it delivered bad news is the characteristic error of this family, and it is expensive precisely because the part is.
The sensor genuinely can drift, and does — they age, and soot and sulphur contamination degrade them. But that conclusion belongs after the system has been checked, not before. Where a pair of sensors is fitted, comparing them across a range of conditions is what separates a drifted sensor from a catalyst that is not converting.
Causes probables
Commencez ici
- Réservoir d'AdBlue vide ou mal rempli · facile
- Dépôts d'AdBlue cristallisés · modérée
- Capteur de NOx défectueux · modérée
- Injecteur d'AdBlue défectueux · modérée
Moins fréquent
- Vanne EGR bloquée · modérée
- Catalyseur de réduction dégradé · spécialisée
- Fuite d'échappement à proximité de la sonde · modérée
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de P2201.