U0023: Bus de communication CAN basse vitesse — (+) haut
Que faire
Everything probably still works, and this is the one fault in this group that should not wait.
Here is why. This part of your car's network can run on one wire if the other fails, so when one gets shorted to battery voltage the car simply abandons it and carries on. You notice nothing.
But the voltage is still there. It is sitting on a wire bundled with the one still in use, and connected to every computer on that network. The safety net hid the fault; it did not remove the damaging condition — and every day it stays is another day of it.
So unlike the rest of this family, get this one looked at promptly even though nothing has stopped working.
The cause is nearly always something fitted after the car was built — a tracker, dashcam, alarm, stereo, light bar or tow bar. A live feed tapped next to the network wires, or a self-stripping connector clipped onto the wrong one, causes most of these. Say what has been fitted, including by a previous owner; unplugging it and re-testing is quicker than any measurement.
And be prepared for the repair to have two stages — see U0005.
Ce que signifie ce code
The positive line of the low speed data bus is being held high. See U0005 for the warning that matters most — battery voltage on a bus wire can damage every transceiver on the network, so the repair may have two stages.
And here that warning has a sharper edge, because of what U0019 explains about this network.
A fault-tolerant bus responds to a wire shorted to power by abandoning it and running on the other. So the vehicle keeps working — while battery voltage sits on a conductor that is bundled with the one still in use, and connected to every module on the network.
The redundancy hides the fault. It does not remove the voltage.
Which makes this the one code in the low speed family that should not be left running on its reserve. A break can wait for a convenient appointment. A short to power is applying a damaging condition continuously, and every day it remains is another day of it.
So the instruction differs from the rest of this family: have this one seen promptly even though nothing has stopped working.
And the cause is nearly always something added — a live feed tapped beside the pair, a self-stripping connector on the wrong wire, a screw through a loom. Unplugging an accessory and re-testing is quicker than any measurement.
Causes probables
Commencez ici
Moins fréquent
- Faisceau de câblage endommagé · modérée
- Infiltration d'eau dans le connecteur · modérée
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de U0023.